turbo 400 trans

Everything from the motor to the wheels

Moderator: John_Heard

Post Reply
Message
Author
joe69Z
Posts: 55
Joined: Mon Oct 03, 2011 10:37 am
Location: Kinston N.C.

turbo 400 trans

#1 Post by joe69Z » Tue Dec 27, 2011 2:19 pm

Question, My cousin is putting a 400 turbo trans in his camaro, There is a bolt screwed into the tail shaft? we took it out is it suppose to be in there? :scratch: haven't tried it out on track, but it backs up and goes forward, don't know about shifting raining here. On the module is there any thing to do for drag racing only? Any IDEAS! thanks!!!!!!!!!!!!!! One guy said screw in all the way in and forget it?

want-a-be
Posts: 189
Joined: Tue Feb 05, 2008 11:04 pm
Location: Southern Illinois

Re: turbo 400 trans

#2 Post by want-a-be » Wed Dec 28, 2011 5:47 am

Joe,

I think that bolt is for truck applications. If I remember correctly they bolted their yokes into place if they used a carrier bearing in the drive shaft system.

Might do some research into that though to make sure my feeble memory serves me correctly... :nutkick:

Don

User avatar
ytnova
Posts: 735
Joined: Fri Oct 28, 2005 9:21 am
Location: orlando, florida/ under a hood
Contact:

Re: turbo 400 trans

#3 Post by ytnova » Wed Dec 28, 2011 7:03 am

Your dead on Don, truck applications usually were bolted on, Heavy duty truck version usually had a drum brake attached also, used for a parking brake.
I am not really sure what the question is, but I am pretty sure the answer is Big Block.

joe69Z
Posts: 55
Joined: Mon Oct 03, 2011 10:37 am
Location: Kinston N.C.

Re: turbo 400 trans

#4 Post by joe69Z » Wed Dec 28, 2011 12:13 pm

we took bolt out should it be ok?

want-a-be
Posts: 189
Joined: Tue Feb 05, 2008 11:04 pm
Location: Southern Illinois

Re: turbo 400 trans

#5 Post by want-a-be » Wed Dec 28, 2011 1:27 pm

joe69Z wrote:we took bolt out should it be ok?
Yes

joe69Z
Posts: 55
Joined: Mon Oct 03, 2011 10:37 am
Location: Kinston N.C.

Re: turbo 400 trans

#6 Post by joe69Z » Wed Dec 28, 2011 4:17 pm

want-a-be wrote:
joe69Z wrote:we took bolt out should it be ok?
Yes
Thanks guy's you guys rock!!!!!!!!!!!!!!!!!!!!!!!! :thumb:

Post Reply

Who is online

Users browsing this forum: No registered users and 21 guests