........Traction bars...????
........What to choose between :
Lakewood : "Traction Action Lift Bars"
OR
Competition engineering : "slide-a-link"
Thank you in advance.
.........Traction bars...!!!!
Moderators: David Lemmond, Dave Morgan
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: .........Traction bars...!!!!
Wow! looks complicated with all those adjustments.
Re: .........Traction bars...!!!!
The slide-a-links will work be better! If your trying to save a buck and don't care if you get the best performance out of a traction system, the Lakewoods will do the job. I had a 67 camaro that I run slapper bars on year ago that was fast as hell (6.3's on the bottle) and it was a street car.
My 2 cent is spend the money!
My 2 cent is spend the money!
Last edited by supernova on Tue Apr 24, 2012 12:45 pm, edited 1 time in total.
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
Re: .........Traction bars...!!!!
One of the fastest guy's around here in the drag radial class has been in the low 5.'s using these bars. But couldn't compete with ladder bar or the 4 link cars in the class so this winter he changed over to a ladder bar set up. The fun thing is he still has not gone any faster! Go figure!!!!!!
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: .........Traction bars...!!!!
The main reason I like this design isn't so much the number of adjustments, it's that they help prevent the front of the spring from bending better than the cal-tracs. In face I'm looking into buying just the front part of them to put on my car. Have to do some measuring first...
My 1971 X275 Nova | Facebook
Re: .........Traction bars...!!!!
A flat plate welded to the Caltrac's thick wall tubing that sits on top of the springs would distribute the loading similar to the Assassin bars. That should help the bending of the springs and would cheap too.
Craig Watson
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
Who is online
Users browsing this forum: No registered users and 48 guests