Shifting gears while hanging the front tires= impressive

Congrats!!

Way to go man!

Fast ride for sure

I have a 496ci that i designed and it made 740hp on the motor with 10 to 1 compression and aluminum GM heads> I HAD NO WHERE NEAR 12,000 OR EVEN 10,000 FOR THAT MATTER! You just have to do your research and spend wisely!! My Motor is also nitrous friendly as well so i dont think i am having any pro...

silvanova wrote:What are you putting that solenoid on?

On my car of course!!!!

shhhhhhhh!!!


Yup! Sure is John! Who knows.. It might go 5.69! But we will see.
This new solenoid should help...

I have a 496ci that i designed and it made 740hp on the motor with 10 to 1 compression and aluminum GM heads> I HAD NO WHERE NEAR 12,000 OR EVEN 10,000 FOR THAT MATTER! You just have to do your research and spend wisely!! My Motor is also nitrous friendly as well so i dont think i am having any prob...

I have noticed that with my mid-high 9 second combo, 3200lbs on a 28x10.5w tire after 40 +/- runs 60's go from 1.32 to 1.36 or so and after 80 runs it goes to the mid 1.4's. There is still a lot of tread left, but the side walls are shot. SEE JOHN!!! I AM NOT THE ONLY ONE DOING THIS MANY PASSES ON ...

I am like John!! I disconnect EVERYTHING that goes to the box. Rather take the time to do that then spend another 700 bucks on another digital 7


Adam

anytime, glad to help

I put a set on my dads 385 SBC and it made 641hp on the motor only. We have not had any problems and they seem to be of really nice quality.

hope this helps

adam

My strange brakes did the same thing. It took forever to get all the air out.

I had to pump them up real good and then crack open the line AT the MASTER cylinder. After i did that a couple times they WERE GOOD TO GO!!


Adam Wright

CONGRATS TO BOTH SAM AND ROBERT! You guys deserved it for all your hard work.

Thanks Robert for letting me use your racing pants, I really appreciate it.

Adam Wright

I plan to switch to calvert split monos one of these days. But right now i am going 1.31 60's with 1979 stock multi leaf springs with cal tracs and a 28/10.5 tire....

ur in luck, I just took my motor to the dyno last week and i borrowed one of the 1" hvh spacers and it did Not make more peak HP. It did help the average HP by 5hp or so and gave me about 8 foot pounds of torque... Every motor is different, but i sure didnt see 47hp on my combo. So in my case, ...