Did you have to make any adjustments when you went to the bigger motor?

Have you ever weighed your car to see what the individual wheel weights was.Would you mine sharing those numbers?

I've seen headers coated in ATF. They look alot better than you would think.

I've ran methanol on my dirt track cars alot.In a back to back test one motor made 604hp on alcohol and 575hp on gas.It is a real dry fuel I used the stuff with a lube added to it. If the car sat very long I would fill the carb full of gas.A lot of people will say you have to run real high compressi...

The nitrous is being injected in the plenum offset from the runners and the fuel at the base of the runners?Is the black on the headers a heat coating?

If you had a pair of single adj. and a pair of D/As which would you put on the rear?I s there a reason drag shocks are always mounted behind the rear end?

When coating a piston on the top and sides can you close the the piston to wall clearance up? .007 is what the manufacture calls out. How thick does the top of the piston directly above the rod need to be to withstand a 500 shot?

Thinking of going to the swap meet. Whats the roads and weather like?

Agree 100% If that guy doesn't send you a free 16volt battery tell us.I won't do business with him.

Several years ago I moved a sbc back 1'' I believe it took 15lbs of the front weight .Weight in front of the front tires hurts the rear % the most because it has a leverage effect on the rear.I think the more rear weight the more traction you will have at the first hit of the throttle

Sometime in the late 60's chevy changed the location of the timing marks on the balancers.8 degrees difference's learned this the hard way too.

What is a good starting rate for a Mako R/S car.Around 850lbs on each front tire. How much travel should the front shocks have?

I've used nitrogen in a imca modified.It cost about 20 or 30$ to fill abottle we used an old cutting torch regulator first time we used it we rolled the r/f tire off .The pressure buildup was holding the tire on the bead.We found no real advantage but our tire temps were usually less than 160 degree...

The cheaper part is the one that I need! That's the first tme that's ever happened.

Would the 8ply tire be a better choice than the 4ply on a 3450lbs car?