Dustin, Pics were sent. John, I believe it is a mild steel piece. The inner tube is 1" x .120 and the outer tubes are 1.25" x .120 wall and have the brass sleeves and grease zerks. The links are double adjustable, so they don't have to come off to mess with the preload, if you are so incli...

8sec71 i like it. it works well. heavy duty and i have beat on it for 2 seasons. all steel, except the brass insert bushings to facilitate lubing the ends. probably 1" OD by .120ish wall. with different ends you can put it on different frame width cars. email me and i can snap a pic or 2 under ...

Here is a lengthy and informative comparison.
http://people.msoe.edu/~yoderw/oilfilte ... study.html

Don't screw with a quick spin in the water, just roll thru to the other side. Hit it fairly hard and use 2nd then 3rd only. 3-4 seconds max, just under redline in high gear. If the letters start to brown, then they have been getting too hot and will not stick. Don't screw with a dry hop on an automa...

I agree with Harold on this one. Anti roll bar is a must. Try this ebay auction for a very nice heavy duty piece. 120011664598 I run it. It works well. reasonable price, good folks to deal with. My SBC on spray made about the same HP and torque as your big motor NA. It would go 8.80-8.90 at about 15...