Here are a couple of videos from today. One is an in-car. (leaving at 1500 RPM) 1033' DA 1.31 6.13 @ 110.93 9.68 @ 137.82 http://www.youtube.com/watch?v=7KLaWp0RZoM (In-car leaving at 1500 RPM) 1.31 6.14 @ 110.94 9.69 @ 137.80 The engine stumbles just a bit on the 1-2 shift due to the wheelie. http:...

The incrementals are all new bests including MPH. I did run a 9.66 at OIR a couple of weeks ago but I question how accurate their 1/4 timers are.

Here is a series of pictures from my track outing on Sat. The car was yanking the fronts pretty hard. Went all new bests in all incrementals except one......right off the trailer no less! I heard a noise in the rear end on my second pass during shutdown and loaded up and came home. Found some broken...

Wow! 3 foot wheelies! That's putting it on the bumper!

When the track is hooking hard I run the rear shocks on the lightest rebound setting. The rear separates more and the front also wheelies higher and longer. On a poorly prepped surface or when the track starts getting greasy I tighten up the rear rebound which reduces separation, wheelie and hit to ...

Thanks for the compliments guys! I do drive it on the street some! I leave off the footbrake at 1500 RPM NO 2-step.......yet at least. :D Here is the combo. 3525 lb '67 Camaro (all steel, full interior, etc.) 454, .060 over (low tension rings) LS7 forged crankshaft Lunati Pro mod 6.385" 13.3:1 ...

Last weekend on a TNT track 62% humidity and 3200' DA I went a wheels up 1.36 60' leaving at 1500 RPM.

Also managed a new best 1/4 mile ET/MPH 9.73/136.61.

Those ET sound familiar. Nice work!

AFCO's for sure! The fronts definitely are NOT bolt in and require moderate modification to the lower control arms to fit.

Yes. Dynomax Ultraflo.

Looks good.

Here's a picture of the 3 1/2" system I recently fabbed up using a Dr. Gas X.

Thanks Bill!

There is a LOT more to wheelies than the cool factor.

AFCO's. Check out my "Launch Pics" post if you want to see them in action!

I took my '67 to the F-body shootout at KCIR on Sat. Below is before/after suspension tweaks. Thanks to Dragfab for passing along some suspension suggestions. Old launch pic 11/12/2006 850' DA 1.35 60 foot http://home.centurytel.net/40Coupe/images/highres/Camaro/wheelie1a.jpg New launch pic 3/10/200...