After ducking my phone calls for a month I called someone else who sells there product, they got ahold of Chris and he called me back in 30 min. well he sent me the spill plates, now I need your help, how due I install them???
I think the templete they use is WRONG, what due you think?
Search found 297 matches
- Sat Jun 19, 2010 11:07 am
- Forum: General BS
- Topic: SOS wings suck, do not get one.
- Replies: 3
- Views: 5107
- Mon Jun 14, 2010 5:43 pm
- Forum: General BS
- Topic: SOS wings suck, do not get one.
- Replies: 3
- Views: 5107
Re: SOS wings suck, do not get one.
Ya I know, and the end plates match the truck real well to .
I have been calling them for a month and no one ever answers the phone
so that tells you about there customer service as well.
I have been calling them for a month and no one ever answers the phone
so that tells you about there customer service as well.
- Fri Jun 11, 2010 2:53 pm
- Forum: General BS
- Topic: SOS wings suck, do not get one.
- Replies: 3
- Views: 5107
SOS wings suck, do not get one.
I bought a SOS Southern Outlaw Shop wing for my 1970 Nova, it fits like shit and is not built properly. The two center spill plates were not even built the same so I can not install them as the angles are different and will put a BIG bow in the wing. I called Chris at SOS and sent him pictures of th...
- Mon Feb 22, 2010 8:00 am
- Forum: Engine
- Topic: Timing issue again HELP
- Replies: 13
- Views: 8618
Re: Timing issue again HELP
Yes we did all that, between the two of us here there is about 60 years of working on engines, this is why we are so lost. The only thing we havent done is look at the timing chain gear marks, but as I said its someones engine in his truck. 1962 so no smog or vacumn can. We even ran a hot wire to th...
- Sun Feb 21, 2010 1:49 pm
- Forum: Engine
- Topic: Timing issue again HELP
- Replies: 13
- Views: 8618
Re: Timing issue again HELP
Doesn't run to bad, stumbles a little when taking off. ( I think too much fuel from acc. pump, and a acc. cam change is needed). Moved the wires back and forth several time each way and nothing still runs at 65* no matter what we due. Easy to start runs OK should have more power I think, adjusted th...
- Sun Feb 21, 2010 10:46 am
- Forum: Engine
- Topic: Timing issue again HELP
- Replies: 13
- Views: 8618
Re: Timing issue again HELP
Not sure about the balancer as I did not install it, but I asked him and he said it only had 1 key way. I heard the same thing about the timing lights. I disagree though as countless guys use them and when I checked them out compaired to the MSD, Snap on and others they all read the same. Several of...
- Sun Feb 21, 2010 9:16 am
- Forum: MSD Ignition
- Topic: Timing issue
- Replies: 2
- Views: 12269
Timing issue
A buddy just bought a 350cu crate engine for his PU. It runs at 65 degrees BTDC at an idel. Piston at TDC ( checked with a dial indicator ) the timing mark on the balancer reads 0. Timing mark at 2 o clock. I had this issue once before on another car and it was the distributoe fazing, took it apart ...
- Sun Feb 21, 2010 9:13 am
- Forum: Engine
- Topic: Timing issue again HELP
- Replies: 13
- Views: 8618
Re: Timing issue again HELP
Put a side through dial indicator in the spark plug hole made for finding TDC on built engines and found TDC and the timing mark on the balancer read 0. The timing mark is at 2 O Clock. Kind of thought the same thing at first( wrong balancer) but at 0 timing and piston at TDC at the same time ( has ...
- Sun Feb 21, 2010 8:38 am
- Forum: Engine
- Topic: Timing issue again HELP
- Replies: 13
- Views: 8618
Re: Timing issue again HELP
replaced the ignition system and still the same thing.
- Sat Feb 20, 2010 10:05 pm
- Forum: Engine
- Topic: sbc pistons
- Replies: 4
- Views: 4160
Re: sbc pistons
I agree as well.
Just tore down a freinds engine after 9 years of running it and you can still see the lath line's in the pistons, so if the skirt is damaged somethings wrong and time to fix.
Just tore down a freinds engine after 9 years of running it and you can still see the lath line's in the pistons, so if the skirt is damaged somethings wrong and time to fix.
- Sat Feb 20, 2010 8:21 pm
- Forum: Engine
- Topic: Timing issue again HELP
- Replies: 13
- Views: 8618
Timing issue again HELP
A buddy just bought a 350cu crate engine for his PU. It runs at 65 degrees BTDC at an idel. Piston at TDC the timing mark on the balancer reads 0. I had this issue once before on another car and it was the distributoe fazing, took it apart and moved the bottom gear 180* and the problem was fixed. On...
- Fri Feb 19, 2010 10:02 am
- Forum: In the Shop
- Topic: Need a new floor jack
- Replies: 14
- Views: 18134
Re: Need a new floor jack
Do not get a crap Craftsman, went through several and when I went to sears the guy said their jacks are junk and they have more return's then they know what to do with.
I have had good luck with Harbor Freight jacks so far.
I have had good luck with Harbor Freight jacks so far.
- Fri Dec 25, 2009 9:20 am
- Forum: In the Shop
- Topic: Winter work in the Garage
- Replies: 7
- Views: 14028
Winter work in the Garage
Well as its winter it was time to work on the garage a little, what do you think?
- Fri Nov 20, 2009 6:26 pm
- Forum: General BS
- Topic: Indoor Drag Racing? Come check it out!
- Replies: 11
- Views: 7644
Re: Indoor Drag Racing? Come check it out!
Slot cars those were the good old days.
Raced the open class cars, 0-60 in a blink of an eye, could hardly even see those cars they went so fast.
Cobalt magnets the works. AH good old days.
No tracks left here in So. Ca. that I know
Raced the open class cars, 0-60 in a blink of an eye, could hardly even see those cars they went so fast.
Cobalt magnets the works. AH good old days.
No tracks left here in So. Ca. that I know
- Sun Nov 08, 2009 10:53 am
- Forum: General BS
- Topic: Racing buckets
- Replies: 26
- Views: 15419
Re: Racing buckets
15lbs. Vega's I was going to buy two 15lbs Vegas monday for $500 for both 1973 & 1974 with V-8s in them, got a call from work and had to go out of state for 4 days, got back and they were gone. Happened more then once. MasterCraft seats here, can sit in them for a week. Time to look for a new job.