I had the flows on my street car and they were louder than the dynas. Not bad at low RPM,s but would rattle the windows and set off car alarms at WOT

If you are going to race on NHRA or IHRA tracks you will have to follow there rules. In general you have to have the cell inside the frame rails and/or steel body or have a special cage built around it. The cage needs to be built with 1-1/4" tubing. You also have to stay 6" forward of the ...

I have a 3.75 stroke lightened sbc from ohio and it is great !!!!

I sold one like that in the spring for $750. if that is any help !!

Just got back from the Maple Grove NHRA race. The action was great!! Some oil and fires with 1 funny car playing in the sand :lol: After the first round Brandon Burnstein was flown to the hospital with kidney stones. No one was saying if or when he would be back to race. His Dad did not run in the s...

Maryland is real bad with DOT also. Even if you are from another state they say if you drive/tow in there state you go by there DOT rules !! not the state you are taged from. They will park you or tow you if there rules are not met

Maybe Pritch & Rich wanted PINKS to look better so they got Clay to do these dumb stunts for them !!! At least falling asleep was made easy.

I had the same problem. I now use 4:10 GM high impact gears and a ultimate pro aluminum cover and axle tube brace kit from LPW (717-394-7432) cost about $275. They are very easy to deal with at LPW. Have used the same gears now for over 400 passes (reset lash a few times) and I drive it on the stree...

I use the kirkey with 1" of extra padding under the factory seat cover ! Don't make it too comfy you might fall asleep at the line and have bad lights

If you use geddex - burnout guard you need to wash it off when you get back from the track. I use it and it works great for the rubber but if it stays on too long it is a pain to get the burnout guard cleaned off. It makes the area you sprayed look like you rubbed a bar of soap on your car after a f...

I reinforced my fenders with 1/4" steel rods and 3" sq flat pcs welded together like the funny car bodies. It stops the flex and cracks and is easy to do.

Not saying anything bad about Harold and his T-400 just parts in general. Any company can have a bad part that breaks. I had a TSI spragless break and they were great about fixing it . I was told this was very rare to have happen but it did.

You are so right John. That was my point about the right info will get the right parts. Alot of times people buy what is cheapest not what will be strong to last. Then will tell everyone about the bad product - not that they were being cheap and did not get what was needed. There are alot of compani...

I live 60 miles from ATI. I have there trans,( 1-powerglide = 2yrs,1- T-350 =10yrs, 1-T-400 =12yrs), converter and balancer in 3 cars. Never any problems. All of ther parts are new, not reused or recon. If you give them the right info you will go faster with the right stuff. I have found there parts...

BBC-396 love NOS. Easy 11-s on budget if you use a bottle. A little bit heavy of a car NA for a budget 396. Just my opinion - good luck