9.32 Pass with 2nd Launch


https://youtu.be/cFutHA9yJXg

we have this category :

A2 13 sec
A1 12 sec
A0 11 sec

Pro ET from 9 to 10.99 sec I'm in this category. . you can declare and change your index all time

Super PRO ET from 6.99 to 8.99 sec

9.36 ET video !

https://youtu.be/ve2GVBqCcMA

Hi Guys ..everything OK. . this is my new Times !
9.60 with Launch in 1 nd
9.37 with Launch in 2 nd
9.32 with Launch in 2 nd with less 6 degree total timing

hello .. Finally my box was damaged from tension jump ... now is repaired OK. . now this is the installation specs : Idle 28 degree total timing 36 degree start retard 9 degree nitrous activation retard 10 degree ( 250 HP) on pink wire I don't understand very well the slew rate gear ... I don't want...

Hi.. anyone can Help me for shock adjust ?? I have just installed qa1 double adjust. ..

Hi Guys ... 8 3/4 was destroyed after 3 pass with 400 HP spray !! , now i have installed a Dana 60 with spool and 4.10 !!



hostare immagini

[

url immagine
I have recently installed this new plate I would spray 300 hp ... some questions

can work with my old solenoid ?

best tune up jet size ?

Yes John ...

Checked everything is ok , now im speaking with MSD technical service ... i dont know what to do ... i have also checked the check spark with white wire at ground and green violet with jump .... no change ... no spark

make test :
wrong flash ... I have not two flash but 3 flash ! 3 flash = low battery tension

trigger resistance is 80 ohm OK and trigger gap is correct .070

tension on msd connection when cranking is 10,6 volts ... is low ?? I have two battery on trunk and 100 ah alternator

crank trigger

John. . when the car was OK. .. The led flash with trigger when pulsating when you crank. ... now make two flash. .. And no flash when cranking , coil is OK

hi ..I have no make other modify at the wires ... I have drived the car all day with no issues. .. this morning the car won't start !! no spark ! and the led flash two times! !tried at disconnected and connect all wires is OK positive and ground is OK. .. Help @!

ok let me know if i have understood .... DARK BLUE at stop switch , when release the pedal at the starting line ( green light on three ) the box will start in gear 1 and remove the launch control RPM that i will be set at 2000 rpm ( i like also with 5000 converter stall ) which cable will active the...