Well were just about ready for test and tune Night! Just want to thank John Heard and everyone for their support and answering my Questions. I think we got a good car built READY to see it make a full BLAST!!!!!!!!!!!!!!!!!!!! Again THANKS GUY'S ! Wishing Everyone a safe and fast racing season!!!!!!...

Thanks Guy's for all the information, Got springs cut lowered car 2" Need taller tires to fill fenders My Cousin has 25" front runners, He only gave $50 .00 never been mounted We'll make due for price Finished about everything but a few interior pcs, lexan windows cut just need to bolt in ...

Just installed a set of Moroso drag springs on 78 Z/28 camaro, Question if I cut front springs for ride height will this close the huge gap between my fender and top of tire? Looks like jaws coming to attack! Have maybe front tires to short paper said they were stock ride height, Just dosen't have t...

I'm almost finished my 78' camaro, What pinion angle should I set my pinion angle -2 to -4 degrees checking off pinion yolk. It's still has leaf springs and my home maded cal tracs, Came out PERFECT, also installings sliders, Got some for $95.00 from Speedway motors. Roller sliders made for Mopar ju...

Been thinking about putting sliders on my camaro. Question, some pics I've seen they are mounted flat and some are at an angle like afco's paper shows that they should be mounted at the angle of the 2 leaf spring eye's centerlines. What, if any difference would it make? Would they work more freely a...

Need to know what spring rate lbs would you guy's suggest for a small block chevy Camaro. I have taken around 100 to 120 lbs off nose? I looked at Moroso's 212 lb springs what do you guy's think?

Went to start engine, turned fuel pump on and fuel went to running out of vent tube? Feul pressure is at 8lbs was running fine Sunday when I started car, Is float stuck or power valve busted ? Any HELP would be greatly appreacated!

Got a chance to get a set of rancho 5000 shocks non adjustable, What shock stroke do I need for Cal Trac bars setup? Also went to crank car this evening turned fuel pump on and fuel went to running out of vent tube? Was fine Sunday. Could it be float stuck, or power valve busted? Fuel pressure is at...

After deciding to go multileafs I want sliders on rear? For placement do I get car at my ride height then weld into position?

My 69' Camaro 63,233 actual miles, 350 lt-1 engine , 2 1/2 " x pipe flow master exhaust. Drive any where anytime, Great Cruiser.

Bracket Nova wrote:I would be proud to call it mine!

SWEET, lets pull a old greasy leaking engine out! No just kidding Clean, Can I keep my 69' Camaro in there?

getting ready to put a set of caltracs on 78 Z/28 camaro, Which is better single or multi leaf springs? Bars are for multi leaf, Can I take springs apart and use main spring? I'd like to get rid of the extra weight!!!!! Any tips? :scratch: Also what does the split leaf springs do? Thanks for any HEL...

want-a-be wrote:

joe69Z wrote:we took bolt out should it be ok?

Yes

Thanks guy's you guys rock!!!!!!!!!!!!!!!!!!!!!!!!

we took bolt out should it be ok?

Question, My cousin is putting a 400 turbo trans in his camaro, There is a bolt screwed into the tail shaft? we took it out is it suppose to be in there? :scratch: haven't tried it out on track, but it backs up and goes forward, don't know about shifting raining here. On the module is there any thin...