caricare immagini

host immagini

Thank you very much JOHN !! i have tried yesterday night with lower hole and caltracs bar in upper hole !! look like hook very good

guys ... Anyone can help me for the front hangers have 2 hole location for the spring Eye ... Upper and lower ... Anyone know the difference in 60 ft ??

I have checked ..

Front travel 5 inches
Rear travel 3.5 inches

Front shock 90/10
Rear shock 9 way setted at 7

This is the last Race , with stock springs and 10" tires ... best ET was 9.6@143 60 FT 1.48 ...


caricare immagini

It looks ok, with that front spoiler not sure if you would be able to go much lower. How much travel do you have in the front end? John from spoiler to floor i have 4 inches .. front travel if i remember is 5 inches .. but i can re-check i have installed the front spoiler 1 years ago for problem no...

NO TRYED !! INSTALLED NOW ALL THIS PARTS ... I MEAN FOR THE FRONT HEIGHT IF IS OK OR NOT

upload immagini gratis

host image

caricare immagini

HI GUYS , I HAVE JUST INSTALLED THIS PARTS :

LOWERING 1" SPLIT MONOLEAF CALVERT

OFFSET 1 1/2 HANGER AND SHACKLE

9 WAY SHOCK CALVERT

PINION ANGLE 3.5 DEGREE

ANY IDEA FOR SETTING ? FRONT HEIGHT ??




caricare immagini

GUYS ... MAKE THE RACE ONE WEEK AGO !! 9.70@143 MPH ! THIS IS MY COMBO ; NEW JOHN COPE VALVE BODY NEW 28 10.5 DRAG SLIK NEW ALLUMINIUM CARBURETOS SCOOP 78-93 NOS FUEL JET 70%110 OCTANE and 30% 100OCTANE FUEL NEW FRONT DAM SPOILER FRONT END LOWERED OF 1 INCH ELAPSED TIME DROPPED FROM 10.0 TO 9.70

Yes, if you change your jetting it should change your AFR. No, I don't have a jet chart for your plate. Without flow testing it we have to guess at it, but our guess will certainly be an improvement over what the manufacturer supplied 8 years ago. I think the plate you have is probably similar to t...