Any system preferances?(Brand) Like i say i am partial to ppg because availablity but there are others around i am sure. Rob I used PPG's "Shop Line" it's kind of there low buck no thrills paint can I guess. They tell me that there is less pigment in the paint. Maybe some one here can tel...

You also should have them checked after you do your final TQ as switching bold with different tq will
distort the hole....Just my 2 pennies worth

Marty, So by shifting early or late will change the amount of slip in the converter at the stripe?? I have a logger in my car so I should see this..

Rob, I think a 1.4 tip I used for spraying the paint...I sprayed all my front end strut arms , pedals,4-link bars and anything that is a bolt on piece. I swiped my wifes portable clothes rack and made hooks to hole them and went ahead and sprayed them with a single stage urethane paint... One thing ...

Thanks Marty......

It is alot of work and time.. Attention to detail is important cause if you can see it in primer it will be there with the paint on it!!! I did use epoxy for a base coat/primer and over that I used a high build primer..The epoxy was great as you can dry sand it or wet sand it but it does need a good...

I had the same problem with building a new car so I tackled the paint my self with some help from others that do it for a living...Painted it in my garage... Check it out!!! http://i126.photobucket.com/albums/p93/sgmotor/2006_0502Image0073.jpg http://i126.photobucket.com/albums/p93/sgmotor/2006_0719...

Anyone here have a set??? I wanted to get a set of David L. jacks that he makes they look just as nice but a hole lot cheaper but he has stopped making them for now...

Fix a flat also works very good and I think better...Spray it inside the slick wipe it around with a rag or a sponge and mount and fill with air..Works well but kind of messy to work with

Marty, Building a new Motor and will Dyno it. What is need as far as info to build a converter
for this new combination...Thanks

I had a Vega and it was a P.I.A. to change the filter...I started using a Moroso filter as
they make a short design and it worked and was easier to service...

With the bypass pluged you need to be careful what filter you use as your
forcing all the oil through it

I agree with John 100% get rid of that Fram Filter!!!! Wix all the way!!!!!!!!!!!!

And after you break that motor in then go with Mobil 1 15/50

Thanks for the reply Randy, I live here in N.J. so racin is done till March unless Atco opens if it gets warm so I won't get to try your suggestions till then.........Thanks again

call goodyear

I have a logger but not one from Randy as I didn't know about him till I joined this board!! I have a computech and so far happy with it but "Unlike Randys unit" have no real support!! Randy has already given me some help with trying to get my car set up right and for that I thank him!!! A...