Search found 773 matches

by chpcamaro
Wed Sep 21, 2011 8:31 pm
Forum: Chassis and Suspension
Topic: Rear End Leaf Spring Perch's
Replies: 2
Views: 3487

Re: Rear End Leaf Spring Perch's

i'm with john on this i would always use u bolts i just feel safer
by chpcamaro
Tue Sep 20, 2011 10:22 am
Forum: General BS
Topic: On board with Young Gun --5.59@125+ in the 1/8th mile.
Replies: 20
Views: 12373

Re: On board with Young Gun --5.59@125+ in the 1/8th mile.

Thanks guys!!! I think there is still some left in it. I am putting a vacuum pump on it as we speak. Its a 496BBC 10 to 1 compression Gm aluminum heads (out of box with no porting) 1050 dominator NOS double cross plate ( single set of solenoids) Single stage Stock 1979 multi leaf springs with cal t...
by chpcamaro
Mon Sep 19, 2011 9:36 pm
Forum: Drivetrain
Topic: Differential gears limited slip to posi traction
Replies: 15
Views: 35301

Re: Differential gears limited slip to posi traction

do you use a trans brake craig ever one that i know using a transbrake has i fun ride befor the locker locks and then again maybe it is the small tire due to the less roll up it engages quicker i from what i have seen happen has been with no less then a 29.5 or bigger tire and that may be the factor
by chpcamaro
Mon Sep 19, 2011 9:24 pm
Forum: General BS
Topic: On board with Young Gun --5.59@125+ in the 1/8th mile.
Replies: 20
Views: 12373

Re: On board with Young Gun --5.59@125+ in the 1/8th mile.

thats is getting down the track way to go what is your setup?
by chpcamaro
Sun Sep 18, 2011 10:48 pm
Forum: Drivetrain
Topic: Differential gears limited slip to posi traction
Replies: 15
Views: 35301

Re: Differential gears limited slip to posi traction

i would with out a doubt stay away from the detroit locker they are great for off road trucks but drag cars and street car no way jose unless you want nothing but problems ask wikd69(harry) ask him if he will ever use a locker again it cost him alot of suspension parts either go a posi or a spool. t...
by chpcamaro
Thu Sep 15, 2011 9:44 pm
Forum: General BS
Topic: Ready once again!
Replies: 38
Views: 20464

Re: Ready once again!

post us up some good pictures and video's you should have some great times this time out slicks will make a world of difference. be safe :thumb:
by chpcamaro
Tue Sep 13, 2011 10:15 am
Forum: General BS
Topic: Here's Back in Black!
Replies: 10
Views: 6897

Re: Here's Back in Black!

awesome looking truck
by chpcamaro
Fri Sep 09, 2011 8:08 pm
Forum: General BS
Topic: Dash Pad Covers - Anyone use one?
Replies: 54
Views: 32085

Re: Dash Pad Covers - Anyone use one?

was his the stock one or the urethan replace dash pad ????
by chpcamaro
Fri Sep 09, 2011 12:02 am
Forum: General BS
Topic: Progress report...
Replies: 11
Views: 6860

Re: Progress report...

now that was good hitch :mrgreen: :mrgreen: :mrgreen:
by chpcamaro
Thu Sep 08, 2011 10:24 am
Forum: General BS
Topic: I know this isn't about racing, but....
Replies: 2
Views: 2731

Re: I know this isn't about racing, but....

wow that is a sad day RIP
by chpcamaro
Mon Sep 05, 2011 8:50 pm
Forum: General BS
Topic: It's time for a upgrade!
Replies: 52
Views: 28907

Re: It's time for a upgrade!

that came out very nice you did a great job i know that is a lot of work and not easy so you did great :thumb:
by chpcamaro
Mon Sep 05, 2011 8:43 pm
Forum: General BS
Topic: Progress report...
Replies: 11
Views: 6860

Re: Progress report...

looking great hitch glad to see your making head way keep the pictures coming
by chpcamaro
Fri Sep 02, 2011 10:16 am
Forum: General BS
Topic: Picking up the Nova Sunday
Replies: 51
Views: 27372

Re: Picking up the Nova Sunday

i like these for ball valves i use these to drain my tank i have it with a 5/8 port i could of used a 1/2 inch port but feed line is 5/8 so i went with it. but it is a 3 way valve so it is super easy to drain the tank and they are stainless
by chpcamaro
Thu Sep 01, 2011 9:15 pm
Forum: Engine
Topic: stroking factory 2 bolt 400 block
Replies: 3
Views: 3498

Re: stroking factory 2 bolt 400 block

here is something to think about when stroking a 400. if your not running a rasied cam you will have cam clearence problems which means you won't have any good cam choices because of the base circle and your lobes will be hitting the rods with a good base circle. i am building a 406 with a bowtie af...
by chpcamaro
Thu Sep 01, 2011 8:30 pm
Forum: General BS
Topic: NorCal Invasion - Aug 27/28
Replies: 6
Views: 5281

Re: NorCal Invasion - Aug 27/28

Hay Rob and Harry, If you guys want some answers, Mark Gidden is the guy that put the invasion series together. This is his facebook page. http://www.facebook.com/#!/profile.php?id=100000566925223 hey aram mark knows us very well as we know him lol i have gave him a ear full at a few events. he is ...