I am confused these tires have the same specs but are sized differntly? Which one would be a better choice. MT # 3055 sidewall width 11.7 thread width 10 overall diamater 28.1 Hossier # 18150 section width 11.7 thread width 10 overall diamater 28 The mt are 28 x 10.5 and the hoosier are 28 x 10 how ...

What needs to be done on a nova to fit a 10 inch rim on the car? I already put my shocks inboard. Reason being i see everyone that runs 275 60 15 drag radial use a 10 inch rim over the 8 is there any benifit to that. Also what backspace would i need with the stock length rearend. thanks

It is the original headlight switch

OK i am stumped i cant figure out what is causing my brake light to go out only when the hedlights are on and i hit the brakes the left tail light goes out. If the headlights are off and i hit the brakes it works but then when i turn the lights on and then hit the brakes it goes off but back on when...

If i mini tub my car and keep the springs in the stock location can i fit a 10 inch rim on the car with a 29.5 x 10.5, i already have my shocks moved in board. Right now i can fit a 28 x 10.5 on a 8 inch rim and a 1/4 inch spacer but it rubs sometimes on the inner frame rail. I have about a inch cle...

Which is smaller the 275 or 28 x 10.5 My nova has a 15 x 8 with a 5.5 backspacing and a spacer and the 28 x 10.5 are close to my fender wheel i had to roll the lip and i have about a half a inch clearence will i have more clearence with the drag radials? Also do drag radials grow like slicks ? thanks

What would I need to plug the dipstick hole is there a certain size plug I could use or just put silicon over the hole. I am not running anymore dipsticks there is no need too after this incidence. Thanks for the help.

I think either my rods or crank hit my dipstick and took a little piece of my dipsick off. I have a dart block and gm dipstick that is correct but i have no idea what happened. Should i be worried about the little bit of the metal from the dipstick or will i be ok? I say a 1/4 inch was tooken off . ...

I tried fuses and and new flashers and my turn signals arent working. At first just the passenger side was working and now i have nothing, i got brake lights and running lights in the rear but no turn signals. Could it possibly be turn signal switch that is the only thing i havent change yet is ther...

I am looing for a electric fan for my street car its a 434 sbc with about 650 hp 11.1 compression, afr 235 264-272 678 658 109. I ahve a csr electric water pump aluminum radiator 31x19 and now need a fan what can you guys recommend me. I seen the blac mgic fans but they are 300 a piece and that is s...

I am looking to swap the original cable i have from the six cylinder to a lokar for my v8 do i need the 24 inch long cable or the 36. I am looking at the universal ones from lokar. thanks

Is there a formula or calculator to determine trap speed? thanks

I am looking for 1/4 mile car weights in around 3200 and car has a 434 sbc making 650 hp.

Car has 28 inch tall tire 4500 stall and 4.10 gears. What rpm do you think i will come thru the traps at i am trying for 7200 rpm i may have to step up to 4.56 gears. thanks

Thanks John for the update, i am gonna order the bumpers from advantage.