Search found 27 matches

by dcw9360
Fri Mar 18, 2011 12:30 pm
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

Ok, thought about this a minute, I think this will work. Note, this changes the circuit so the throttle switch does NOT activate the relay anymore. The relay goes hot when the arming switch is turned on. In this diagram u would have to press the WOT switch to get 12 to the controller and have a but...
by dcw9360
Fri Mar 18, 2011 12:28 pm
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

When Transbrake is activated it turns WOT switch off then
when released the WOT switch activates the solenoids and controller.
by dcw9360
Fri Mar 18, 2011 12:13 pm
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

no...have 2 relays...one for n2o and one for transbrake
and this would not work...
will let ya know if i find answer...
thanks
by dcw9360
Fri Mar 18, 2011 11:45 am
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

I see - if the controller takes that long to reset, that can be a problem. So with that controller, if you pedal it, the controller picks back up where it left off unless you leave the nitrous off for 10 seconds, then it resets? After its activated and pulses it stays on at 100%... that way if you ...
by dcw9360
Fri Mar 18, 2011 11:27 am
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

No...That will only activate the controller ...then would have to reset each time.... before leaving....
takes 10 sec or so to reset by itself..
by dcw9360
Fri Mar 18, 2011 11:09 am
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

ok.... how would the relay be wired???
by dcw9360
Fri Mar 18, 2011 10:52 am
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

Excuse my ignorance but ,,,,, you added anther ground with a push button to ground...where is the 12 volt???
Leaving on transbrake and WOT switch....
Cant get 12 volts until thats activated....
Confused here...SORRY
by dcw9360
Fri Mar 18, 2011 10:19 am
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

YES!!
by dcw9360
Fri Mar 18, 2011 9:44 am
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

So the controller always see's 12 volts????
by dcw9360
Fri Mar 18, 2011 8:46 am
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

You'll have to test it, some progressives when you do that will start back up where you "lift" at, which would screw you up. If it restarts the timer everytime you trigger it that setup would work. OR, you could just make a switch that grounds the solenoids to fire them directly - that's ...
by dcw9360
Thu Mar 17, 2011 9:36 pm
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Re: Progressive Controller

Thats an idea...thanks
by dcw9360
Thu Mar 17, 2011 4:17 pm
Forum: Nitrous
Topic: Progressive Controller
Replies: 33
Views: 35305

Progressive Controller

Anyone know of a way to bump the n2o through the engine at the line before leaving,,,instead of just purging!!!!
Controller controls the ground on the solenoids... so how can it work????
SOMEONE PLEASE!!!!
15834nos is the box im using..