i only have a chevy 283 sbc wanted fords to race in the tn, al, area street race for cash at the track i do not street race street car dont mean street racing runs 14.50 1/4 mile 8.99 1/8 mile im looking to run heads up with street racers

how do get the pic small to put on here

im building 434 sbc im stuck on rods what is better 6inch or 5.7 do the 6 weight more and if so would the 5.7 rev faster witch is the better way to go

yeah i would feal lot better to have it above me little anyway what do you think would be best to redo the cage or can i add a bar on top the front is uo all the way its the one behind the seat so the halo bar comes down at a angle i just wonder what they would say bout adding on top of it Won't mat...

i called nos about my system they tell me that the double cross plate is like running two big shoot plates and if i use the main bar it would be like useing the big shoot kit and they said with the two bars working the smallest kit is 200hp settings witch is down from 300 when i got it back in 04 i ...

lmao like the guy that built it

vegaracer wrote:Let a midget sit in it when you get the cert done

i was talking bout restricting the flow so it can come up to temp i had a block i got at a swapmeet that was used in mud racing the had the big ports blocked off in the block on top[ where the heads bolt on it was taped and had screw in plugs i liked to never got them out i dint know if you had to d...

its a nos double cross plate system single stage i think i need to sell this one and get a smaller kit

supernova wrote:is it a 2 stage plate and what is the smallest nitrous jet you can put in it?

its a single plate wit two bars the jetting hp n2o 52 jets fuel 53 jets is 300 shoot in total i got two 52 jets and two 53 jets

supernova wrote:A 52 jet is only around 125 shot. start with that and work your way up.

what about blocking the water ports would i need to do that

vegaracer wrote:I've never had problems with alcohol being corrosive. The system is never flushed or anything like that. We do run an additive in the fuel though.

can i run one side of the crossplate i have that would be 150 i guess i think the jets are 51 fuel 52 nos i never player wit nos before and think i got in over my head this site has been a big help thanks You can try 300. I might take it you just don't know until you try it. I had a 385 sb yrs ago t...

i have nos cross that goes from 300hp to 500hp ive been told that my heads chambers are to small for that much nos they are 55cc sbc heads my pistons have 7cc dome can i use one side on the plate does anyone know why nos says the lowest hp for it should be 300hp

thats not good i have a cross plate and the lowest setting is 300 hp wonder if i can use one bar in it 14.88 to 1 is what I come up with. The thing I have a problem with is with high compression and a small chamber makes for a small squinch area so trying to put nitrous in it may be limited. I would...

thats not good ive lowerd the seat to the floor already i guess ive got to redo the cage

71 Nova wrote:The 2009 NHRA Rulebooks states: "All roll bars must ... extend in height at least 3 inches above the driver's helmet with the driver in normal driving position."

fuel or alcohol what makes more power i run 114 now would i gain anything running alcohol