it is mostly on the street. I only race about 5 times a year.

When do you think I would run into hard start or worse kick back. If I put in the black the it will be all in at 2800 18* start then to 36*

I cant get the rear screw to move it is like welded in, not realy but it wont move.

I have played with it on thy dyno and it like 37 not much more than 36. I was just wondering about initial. I need to change the bushing (what a pain) What do you think 18-19 would do?

Could you recomend an inital timing for me. I have a blue bushing in with two light blue springs. It is set at 16 now so 37 all in at 3200. I am thinking of going to the black with the same springs 19 to give 37 all in at 2800. I do have a vac hooked up but would get rid of it iff you think I should...

Changed to a blue pump cam and 40/37 and that keeps it at 13 a/f. My next isue is after I let off the gas and hit the brakes it wonts to stall. If I give it a second it is fine. I looked down the carb and the rear butter flies are not as open as the front. Should they be the same?

I get 13.5 out of gear and 9.5-10 in. I am with you something is not wright. I think It might be the pump cam's. I am in the top hole on the link and top hole in the pink cam's. For some reson I think it should be in top hole and second on the cam but might be way off. I think everything is adjusted...

I went from a holley vac to a holley street hp dp both 750. The problem I have is it wonts to stal ang go lean (16 or less)when I hammer it. I have 47 shot front and back with pink cam (might be orange) and still have it. My old carb had 37. I have the scew with the hole and my lever does not have s...

what about my prop valve? I have two lines that come out of the master and go to the block. The block have two lines that come off the block for the front and one in the back for the rear.

I have a 55chevy and am thinking of going with a line lock. It have 4 disk manual master and prop valve. I have two front brake lines and will but both together on the bottom port. Any probles stoping it on the street?

I am having computer problems big time. Man I love your car. It sounds grate. I think I would need half a track just to be able to get a good look at the back at the 1/4. I cant get a picture up they are the wrong file or something. I will be the on blue and white 4dr 55 with a simpson baby seat at ...

Man I have had some problems with the computer. Sorry it took so long. Got it going with the vac gauge and got the most with a little over 1/2 on all 4. 14.5 and 10.5 in gear and the gauge was pretty steady. I could only get about 9 with the old carb. My only problem now is It goes lean and pops a l...

I think I will go unfiltered, I dont drive it much. Yea I will be in the show. Having some paint done this week. That will give me 2 weeks to clean and I will need it. I blew off a radiator hose last week. I will get to know my buff ball. It is a 55 4dr chevy blue stock in and out. The drive train i...

Getting ready for autorama and then muscle car club chalange.

Thanks. When is your first race and at what track?