I am completely on the fence as far as what shocks to use on my 68 Camaro front and rear stock location with big block, I had comp eng on the rears but there old now, and had some crap gas a just on the front, im gearing this thing up and going plenty faster so im looking for something that will han...

good deal guys thank you very much for all of y,all's help its been interesting and very helpful thank you.

So you had to make holes from the inside of the car to get to the bell housing bolts? How many holes if you did? Thanks

hey wikd69 I meant to ask you, I saw some of your build pics and saw that you had a CSR flex plate/trans shield on your tranny, I was wondering how that fit up in your fire wall area when you had everything bolted up in your 69 Camaro, cause I have a 68 and I figured there relatively same I guess, a...

I appreciate the reply wikd69 thank you for all your help.

that's a beautiful set up you got wikd69 thats just awesome, do you use solid motors mount with front plate on your Camaro? just wondering on my 68 that's how I got mine set up but haven't ran it that way yet

im gonna give that a shot john looks like a lot easier to use thanks for all your help,

perfect john that's a very nice front end you got there, so theres a little lip that pushes out at the bottom of the tab and that's where you would rest the plate, that pic explains everything thank you very much for your help. oh one last thing john you said you use right stuff for your water pump ...

Ray do you put silicone on both sides of the gasket or just on one side? so y'all suggest welding a tab off the frame rail so the plate can sit directly on it and then weld another tab up to bolt the plate into just want to make sure I got the idea right thanks guys for your help, I know It might be...

IM LOOKING FOR ANY IDEAS AS TO WHAT TO USE FOR SEALANT OR GASKETS FOR THE WATER PUMP ON MY FRONT MOTOR PLATE, ALSO IF ANYBODY HAS ANY IDEAS OR EXPERIANCE FOR WELDED TABS ON THE FRAME RAILS TO BOLT THE FRONT MOTOR PLATE TO THIS IS A 68 CAMARO STOCK FRONT CHASSIS ANY INFO WOULD BE GREATLY APPRECIATED ...

I got a pretty good deal on some brodix 312 race right bare so I think I'm going that rout, thanks for the info ray appreciate it.

cool thanks for the tip and info I appreciate it.

The last time I ran the car the best E.T was 10.46 but that was with a diff combo all around the only thing that was the same we're the heads, so this new top end I got I have not ran or put down on the track, just looking like always to gain more power try something diff and loose a little weight c...

think im going with the brodix race rites -2 plus 312 with stock exhaust port location, thanks guys for all your help and replys y'all have been awesome.

Thanks for the reply,I'm working with a 468 big block I have cast iron heads now gm r-port 219 valve 188 exh 325 cc 118 chamber, dome pistons 13.1 solid roller cam 726 int lift 714 exh 284 -294 dur 454-r victor intake 1050 dominator ,just wanting to get the engine to flow as solid as possible and ga...