gonzo64nova wrote:I noticed something in the video.... you dont have any kind of filter on the overflow tube from the cell. Rubber from the burnout can be sucked in and clog the fuel pump. Jerry Bickel sells a bulkhead fitting that has a small KN style filter on it. Just drill a hole in the floor pan and connect the hose. You also might want to change to a bigger hose its supposed to be as big as the fuel outlet so it doesnt slow down the flow but I've used a -6 or -8 (depending on fuel flow) and it worked great.
Great Info I lost a pump 3 races agao, It was acting erratic but it was 111 degrees out so everyone was having issues. When I changed it out it was full of the fuel cell foam. I changed out the pump anayways and cleaned everything out , but did not replace the foam in the tank & had no idea it was dripping until this video. The outhlet is 10 AN So I should change to that?
Thanks for the input