Your welcome!
I bet that thing is going to be a blast with a Lenco in it. I drove a buddy of mine top sportsman car that has a 3 speed Lenco and it was all I could to find the second and third gear levers. What a rush!!!
Nova rack width
Moderators: David Lemmond, Dave Morgan
Re: Nova rack width
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
Re: Nova rack width
I used 1-1/8" x 1/8" 4130 tubing for my subframe cross members.
Finished up my motor plate mounts yesterday. I'm really pleased with how it turned out. Just need to mock up my alternator, vacuum pump and fuel regulator now so that I can trim the excess plate.
The short block parts are out being machined and I'll be finishing up the heads as soon as I can nail down the springs and retainers. The lower intake is all fitted and the heads are drilled and tapped for it.
Can't wait to run this thing on the dyno in a few weeks!
Finished up my motor plate mounts yesterday. I'm really pleased with how it turned out. Just need to mock up my alternator, vacuum pump and fuel regulator now so that I can trim the excess plate.
The short block parts are out being machined and I'll be finishing up the heads as soon as I can nail down the springs and retainers. The lower intake is all fitted and the heads are drilled and tapped for it.
Can't wait to run this thing on the dyno in a few weeks!
Craig Watson
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
Who is online
Users browsing this forum: No registered users and 16 guests