front subframe and rear frame alignment for 71 nova
Moderators: David Lemmond, Dave Morgan
front subframe and rear frame alignment for 71 nova
need info on fixing body mount holes and recutting new holes on my 71 nova subframe and how to align them without sending it to a fab shop i fixed 1 hole and cut a new hole but i dont think its right having body panel and rad. support alignment issues and im switching to a big block from a small block and want it to be right and sound before i start on the motor and trans. thanks
Re: front subframe and rear frame alignment for 71 nova
buy you some big washers that have the same diameter hole .
find you a piece pipe to use to CENTER the washer on the body mount and weld them on the BOTTOM side of the mount then you can take a die grinder to cut the rust metal on top.
weld the the top.
grind smooth
find you a piece pipe to use to CENTER the washer on the body mount and weld them on the BOTTOM side of the mount then you can take a die grinder to cut the rust metal on top.
weld the the top.
grind smooth
Who is online
Users browsing this forum: No registered users and 49 guests