broken bellhousing th350
Moderators: David Lemmond, Dave Morgan
broken bellhousing th350
Has anyone ever had a problem braking the bellhousing on their auto trans. I have a g body monte carlo that brakes the bell and soon the bank. Both of my montes have broken the bells. Both cars are foot brake raced, first car 1985 monte 3510 with driver 355 motor 12 bolt rear 32" s&w ladder bar solid motor mounts rubber trans mount. Performance 1.65 60" et 11.91 @110. Ok car #2 1987 monte 383 motor 3660 with driver solid motor rubber trans mount buick gn rear both cars have 4 10 gears performance is 11.0s @120 1.55 to 1.53 60" more one has aftermarket crossmember the other one is stock. tire size 275/60/15 and 26/9/15 . I hope this is enough information if not you are more then welcome to call at home 570 345 3806 john in pa thanks
- Carolina Kid
- Posts: 254
- Joined: Sat Jul 26, 2008 10:56 am
Re: broken bellhousing th350
be sure the driveshaft is not to long.
Re: broken bellhousing th350
Any chance the chassis is twisting?
- Bruce69Camaro
- Posts: 1799
- Joined: Thu Jul 23, 2009 11:07 am
- Location: PA
Re: broken bellhousing th350
Hey John,
Do you run at the Grove?
I got a few buddies at S&W if you want I can give you their contact info, in fact one of them even races a Monte.
Let me know.
Bruce
Do you run at the Grove?
I got a few buddies at S&W if you want I can give you their contact info, in fact one of them even races a Monte.
Let me know.
Bruce
Those who think they know it all have no way of finding out they don't.........
- CDR Performance
- Posts: 147
- Joined: Tue Mar 02, 2010 7:41 pm
- Location: Indianapolis, Indiana
Re: broken bellhousing th350
Check the driveshaft length.
CDR PERFORMANCE
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
Re: broken bellhousing th350
I ck the driveshaft length but not the angle power house makes a driveshaft angle gauge ever use one local trans shop told me that if the angle is off it will brake the bellCarolina Kid wrote:be sure the driveshaft is not to long.
Re: broken bellhousing th350
Hey Bruce I run at numidia the grove is only 24 miles from my place if you got someone that can help giveBruce69Camaro wrote:Hey John,
Do you run at the Grove?
I got a few buddies at S&W if you want I can give you their contact info, in fact one of them even races a Monte.
Let me know.
Bruce
me their contact info and I will give them a call.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: broken bellhousing th350
One of my buddies broke a number of bellhousings, including a Ultra bell in his G-body. He did a shot gun approach, putting in a pinion snubber and changed the drive shaft length at the same time and it fixed it. Most likely at some point it's bottoming out the driveshaft.
My 1971 X275 Nova | Facebook
Re: broken bellhousing th350
No cage at all in themmytmouz wrote:How much cage 'ya got in them?
Re: broken bellhousing th350
Thanks John I took the ladder bar car to a driveshaft shop had them make me one.I build my own trans and after it brakes the bell I reuse everything but the case. I would see that the driveshaft is hitting the tail when i pull them apart. The local trans shop told me that its vibration and now that i think about it it did walk a tail shaft bushing out.John_Heard wrote:One of my buddies broke a number of bellhousings, including a Ultra bell in his G-body. He did a shot gun approach, putting in a pinion snubber and changed the drive shaft length at the same time and it fixed it. Most likely at some point it's bottoming out the driveshaft.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: broken bellhousing th350
My memory isn't great on this, but it seems to me his first problem was a broken tailhousing, maybe two of them, then he broke a bell housing. I believe he did the driveshaft change, added pinion snubber and put a different transmission in it all at the same time and problem went away. Hard to tell which one was actually the problem.
I believe it was a turbo 350
I believe it was a turbo 350
My 1971 X275 Nova | Facebook
Re: broken bellhousing th350
Chassis flex most likely. Did the same thing on a MC I had until I got a 6 point...1320john wrote:No cage at all in themmytmouz wrote:How much cage 'ya got in them?
Trucks are for haulin...
-
- Posts: 88
- Joined: Sun Dec 18, 2005 6:53 pm
- Contact:
Re: broken bellhousing th350
Another vote for the driveshaft, But I think it may be too short. Had a buddy of mine, Got him some good shocks on the car that made it dead hook, 3 passes later, broke the case. So thinking it may have been just one of those deals, replaced the case again. 3 passes later, broke the case. So really started to look at things, noticed that there was probably over an 1/8 inch of play in the transmission yoke up and down. Replaced the case again, measured for new driveshaft , and new driveshaft came back 3/4 of an inch longer. Hasn't had a problem with it since.
I would get under the car with everything at rest and see if you can feel any significant play in it.
I would get under the car with everything at rest and see if you can feel any significant play in it.
Bill Simpkins
74 Nova
SBC 406
3240 pounds
Speierracing heads
60 1.29 (10/15)
1/8 6.05@111 (11/15)
Best 9.87@131 on the rev limitor 1 Feb 201
74 Nova
SBC 406
3240 pounds
Speierracing heads
60 1.29 (10/15)
1/8 6.05@111 (11/15)
Best 9.87@131 on the rev limitor 1 Feb 201
Re: broken bellhousing th350
NOT A GBODY... just adding my 2 cents...
Embarassed to say this ......happened to us three times back to back.. We all learn from our lack of knowledge...
I purchased a used larger motor than i had in there.....and installed it... then went through three housings.... WTF?
Fianlly removed the motor and installed it on a motor dyno and watched it VIBRATE all over the floor... was ready to tear down the entire motor and an old timer said.....WAIT! and he changed the fly wheel................BAM! wrong FLYWHEEL....
Installed a weighted one and it purrrrred like a kitten....
VIBRATION KILLSHOUSINGS!
6.01 @ 116 on 9 Inch Slicks
Who is online
Users browsing this forum: No registered users and 14 guests