70 CUDA REAR END
Moderators: David Lemmond, Dave Morgan
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
70 CUDA REAR END
HI GUYS , I HAVE JUST INSTALLED THIS PARTS :
LOWERING 1" SPLIT MONOLEAF CALVERT
OFFSET 1 1/2 HANGER AND SHACKLE
9 WAY SHOCK CALVERT
PINION ANGLE 3.5 DEGREE
ANY IDEA FOR SETTING ? FRONT HEIGHT ??
caricare immagini
LOWERING 1" SPLIT MONOLEAF CALVERT
OFFSET 1 1/2 HANGER AND SHACKLE
9 WAY SHOCK CALVERT
PINION ANGLE 3.5 DEGREE
ANY IDEA FOR SETTING ? FRONT HEIGHT ??
caricare immagini
Last edited by raffaplymouth on Tue Jul 21, 2015 3:44 am, edited 1 time in total.
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Re: 70 CUDA REAR END
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Re: 70 CUDA REAR END
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: 70 CUDA REAR END
Looks great! What specifically are you talking about in regards to front height? You mean the front end? looks like it's sitting pretty good right now. Have you tried it like this yet?
My 1971 X275 Nova | Facebook
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Re: 70 CUDA REAR END
NO TRYED !! INSTALLED NOW ALL THIS PARTS ... I MEAN FOR THE FRONT HEIGHT IF IS OK OR NOT
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: 70 CUDA REAR END
It looks ok, with that front spoiler not sure if you would be able to go much lower. How much travel do you have in the front end?
My 1971 X275 Nova | Facebook
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Re: 70 CUDA REAR END
John from spoiler to floor i have 4 inches .. front travel if i remember is 5 inches .. but i can re-check i have installed the front spoiler 1 years ago for problem no straight at high speed ... with spoiler is better ... my question is ... with this rear height wher is the best front height ?? What can 'change in 60 ft with different front height ??John_Heard wrote:It looks ok, with that front spoiler not sure if you would be able to go much lower. How much travel do you have in the front end?
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: 70 CUDA REAR END
5" should be plenty of front travel, and I would not worry about making the car sit really low at your current ET level. As the car gets faster you may want to lower it overall to reduce the instant center, but right now I think you have a good starting point.
My 1971 X275 Nova | Facebook
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Re: 70 CUDA REAR END
This is the last Race , with stock springs and 10" tires ... best ET was 9.6@143 60 FT 1.48 ...
caricare immagini
caricare immagini
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Re: 70 CUDA REAR END
I have checked ..
Front travel 5 inches
Rear travel 3.5 inches
Front shock 90/10
Rear shock 9 way setted at 7
Front travel 5 inches
Rear travel 3.5 inches
Front shock 90/10
Rear shock 9 way setted at 7
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Re: 70 CUDA REAR END
guys ... Anyone can help me for the front hangers have 2 hole location for the spring Eye ... Upper and lower ... Anyone know the difference in 60 ft ??
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: 70 CUDA REAR END
That would depend on what the car needs. The lower hole will likely hit the tire harder, upper less hard at launch. When you put the spring in the upper hole you'll lower the car and change the center of gravity, less violent, less pitch rotation, etc. At this point in time with the car's ET you probably want them in the lower hole.
My 1971 X275 Nova | Facebook
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Re: 70 CUDA REAR END
Thank you very much JOHN !! i have tried yesterday night with lower hole and caltracs bar in upper hole !! look like hook very good
1970 Super Cuda 496 Indyheads
ET 9.32@148 1.42 60ft (250 shot )
ET 9.32@148 1.42 60ft (250 shot )
-
- Posts: 162
- Joined: Tue Jul 24, 2012 2:07 pm
Who is online
Users browsing this forum: No registered users and 3 guests