How often do you remove the sliders and clean them, re-lube them?
Also what do you use to lube them or how often?
Thanks,
Slider cleaning/Lubing?
Moderators: David Lemmond, Dave Morgan
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Slider cleaning/Lubing?
Not sure which model you have, but most have sealed bearings. Can't hurt to take everything apart once a season and inspect stuff, see if you have a bearing getting loose or anything. Look for the bearing digging into the slider, that's a good indication you don't have anything to prevent overtightening of the spring bolt. Most sliders should have a tube that spaces the bearings out that the bolt goes through, but some don't.
My 1971 X275 Nova | Facebook
Who is online
Users browsing this forum: No registered users and 14 guests