Suspension Tuning, Troubleshooting, Design and Discussion
Moderators: David Lemmond, Dave Morgan
-
dms2871
- Posts: 56
- Joined: Fri Aug 05, 2011 5:39 am
- Location: Norwalk Ohio
#31
Post
by dms2871 » Wed Aug 10, 2011 10:10 pm
supernova wrote:I have 275/60/15 drag radials that are 28" tall, 10.5" wide on a 10" rim with 5.5" back spacing with nothing removed, moved or cut.
you no longer have this set up? i believe it will work on mine too then i didnt cut any thing yet. you said at that time you didnt cut anything or move anything. what about now what are you running
-
dms2871
- Posts: 56
- Joined: Fri Aug 05, 2011 5:39 am
- Location: Norwalk Ohio
#32
Post
by dms2871 » Wed Aug 10, 2011 11:45 pm
supernova wrote:I have 275/60/15 drag radials that are 28" tall, 10.5" wide on a 10" rim with 5.5" back spacing with nothing removed, moved or cut.
oh yeah what rim make are these thanks
-
supernova
- Posts: 2552
- Joined: Sat Feb 02, 2008 7:35 pm
- Location: Ft.Worth Tx
#33
Post
by supernova » Thu Aug 11, 2011 5:01 am
Weld Pro Stars. 10/15 with 5.50 back spacing. My rear end is not stock width though. it's Ford 9" that had to be cut down......
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
-
dms2871
- Posts: 56
- Joined: Fri Aug 05, 2011 5:39 am
- Location: Norwalk Ohio
#34
Post
by dms2871 » Thu Aug 11, 2011 1:38 pm
supernova wrote:Weld Pro Stars. 10/15 with 5.50 back spacing. My rear end is not stock width though. it's Ford 9" that had to be cut down......
i meant before. did you cut the axle down i understood you had those rims and tires on it before you cut the ale
-
chpcamaro
- Posts: 773
- Joined: Sun Nov 09, 2008 1:28 am
- Location: socali
#35
Post
by chpcamaro » Sun Aug 21, 2011 10:58 am
if your running a stock width rear end you need a 6.5 back spacing on a 10 wide rim if we are talking a mini tubed car
best to date N/A 8.91@153
psca
westcoast heads up racing open comp
67
Camaro RS/SS
BBC Powerglide 4800 stall 4.11
29.5x10.5W
http://www.chpdragracing.com
-
dms2871
- Posts: 56
- Joined: Fri Aug 05, 2011 5:39 am
- Location: Norwalk Ohio
#36
Post
by dms2871 » Tue Aug 23, 2011 5:04 pm
yes i was talking mini tubed with the shocks and leaf springs moved inboard
-
dms2871
- Posts: 56
- Joined: Fri Aug 05, 2011 5:39 am
- Location: Norwalk Ohio
#37
Post
by dms2871 » Wed Jul 06, 2016 9:06 pm
supernova wrote:I have 275/60/15 drag radials that are 28" tall, 10.5" wide on a 10" rim with 5.5" back spacing with nothing removed, moved or cut.
So you never mini tubbed or moved leaf springs inboard
-
supernova
- Posts: 2552
- Joined: Sat Feb 02, 2008 7:35 pm
- Location: Ft.Worth Tx
#38
Post
by supernova » Mon Jul 11, 2016 4:34 am
nope !
Blackhoodmafia!!!!
1972 Nova SS
572 C.I. BBC
Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs
Who is online
Users browsing this forum: No registered users and 7 guests