DiamondP Products: SBC Valve Covers/ 671 Supercharger.....

Press Releases for New Products and Services

Moderator: John_Heard

Post Reply
Message
Author
Dzuari
Posts: 2
Joined: Tue Jan 25, 2011 6:36 am
Location: Muncie, IN

DiamondP Products: SBC Valve Covers/ 671 Supercharger.....

#1 Post by Dzuari » Thu Jan 27, 2011 7:19 am

~Diamond P Industries~

About DiamondP:
http://www.diamondp.com
DiamondP is an after-market automotive retail company and a sales outlet for our two main businesses, Phillips Patterns & Castings, an aluminum foundry and CNC shop, and 21st Century Die-cast LLC., an aluminum Die-cast foundry owned by Phillips Patterns & Castings and Tippmann Sports LLC(Tippmann Paintball). http://www.phillipspatterns.com/

DiamondP was started in the fall of 2008 as a way to create more work for our foundry and CNC shop due to the recession in the country, with our family being avid car enthusiast for generations it wasn't hard to decide to move into the after-market automotive.

Before DiamondP though was Phillips Patterns & Castings, a company that was started all the way back in 1947 by my grandfather, Gerald Phillips Jr., it was nothing more than him and a friend in a chicken coop making patterns for the local foundries in the area. Since then it has turned into a fully functioning aluminum foundry that is capable of producing non-ferrous castings from green sand, air set, permanent and die-cast molds, and produce them completely starting from just an idea to finished part ready to ship, without ever leaving the walls of our foundry.

Image Image Image
Image Image Image

DiamondP Racing

We not just a after-market retail company. For the past couple years we have been going out to the local drag strip and racing various cars, but with the creation of DiamondP, our weekend fun has quickly turned into a other sales and advertising outlet. Currently we are racing a 2600lb 750hp Alcohol SuperPro Camaro with a 489 bbc. However with our 671 supercharge getting close to full production we have been considering pulling the 489 and building a rail for more accurate E/T's and dropping a supercharged sbc or bbc into the Camaro as a way to show off how well we make our products.

Heres an in-car video i made of a pass at our local strip in Muncie, IN.





Image
http://www.youtube.com/user/DiamondPIndustries

Image
http://www.facebook.com/pages/Diamond-P ... 3104368019

Image
http://stores.ebay.com/DiamondP-Industries









DiamondP Cal Custom SBC Valve Covers:

http://www.diamondp.com/category_s/130.htm

Image
Image
Image


DiamondP Cal-Custom Valve Covers are 100% Made in the U.S.A., sand cast out of A356.2 Aluminum Alloy at our own foundry In Muncie, IN. They fit gen 1 SBC engines (1958-1985 / 283-400ci) and have CNC machined Spot Faced Bolt Holes and an Over All Material Wall Thickness of a 1/4in. You can order these on our website at http://www.diamondp.com/category_s/130.htm due to the price and time it takes to manufacture these high quality valve covers we keep a low quantity in our inventory so depending on your finishing, your purchase might be on back order.
Part Number: DP-0001
Interchange Part Number: 10X-XXX

Quality: We've found that due to the price of our valve covers that they sell themselves in person much more than they do looking at a picture over the internet, but to tell you the quality on these parts, I will just tell you the how we make them. there are 10 different jobs to do for this one part, all are done directly though our foundry and CNC shop from start to finish except for some finishing’s.(I've personally done 6), 7 of them all involve a different person handling, inspecting and working each individual part, if at any time one of our workers find a a single crack or warp in the casting, scratch in the finish, shrink in the metal, or faulty or scored machining surface the part will be scrapped and reprocessed through our furnaces. We strive to produce the highest quality parts on any market we are in and want our name to be associated with nothing less.

Finishes: While our website may only list a few finishes for our valve covers we are capable of finishing them in and color powder coat, anodized, polished or chrome & with custom inlay color of your choice. You will have to call for a custom finish though; and will be given a quote. 1-(765)-289-2816

Over The Internet Finishes
- Steel Shot Blast
- Real Tree Camo Powder Coat
- Mossy Oak Camo Powder Coat
- Digital Camo Powder Coat
- Polished Aluminum
- Chromed Finish
http://www.diamondp.com/category_s/130.htm









DiamondP 671 Roots Supercharger

http://www.diamondp.com/Diamond_P_Blowe ... _s/122.htm


Image

Back Bearing Plate



Image

front Bearing Plate



Image

2x4 Carb spacer




***Currently***
We only have a two-four carb spacer plate, rear bearing plate in full production; the front gear cover is in the prototype phase and is waiting testing for production. The screw, front bearing plate, and blower housing is completely designed and are waiting to move into prototype and production. I will post more new products periodically as they go into production.
*EDIT*Front bearing plate is not in full production.

DiamondP 671 supercharger rear bearing plate is 100% Made in the U.S.A. cast out of A356.2-T6 aluminum alloy, and has a T6 two phase heat treat resulting in a 30% increase in strength from the base casting. Fits any 3-71, 4-71, 6-71, 6v71, 8v71, 6v92, 8v92. This DiamondP product was designed In direct correlation with deans blowers, A company that specializes In blowers, and like all of our products this one was designed to surpass any other plate on the market in quality and strength to insure our customer a 100% satisfaction.

- Shot Blast Finish with Machined Faces
- Bearing bores - 0.0005" + 0.0000" Tolerance
- Bearing bore diameter: 2.0455"
- Seal bores - 0.001" + 0.000" Tolerance
- Seal bore diameter: 1.8260"
- 100% CMM Inspection to Insure complete casting and CNC perfection
- Part Number: DP-0011
- Interchangeable Part Number: 101-001
http://www.diamondp.com/DP_Rear_Bearing ... 01-001.htm



~Diamond P Industries~

About DiamondP:
http://www.diamondp.com
DiamondP is an after-market automotive retail company and a sales outlet for our two main businesses, Phillips Patterns & Castings, an aluminum foundry and CNC shop, and 21st Century Die-cast LLC., an aluminum Die-cast foundry owned by Phillips Patterns & Castings and Tippmann Sports LLC(Tippmann Paintball). http://www.phillipspatterns.com/

DiamondP was started in the fall of 2008 as a way to create more work for our foundry and CNC shop due to the recession in the country, with our family being avid car enthusiast for generations it wasn't hard to decide to move into the after-market automotive.

Before DiamondP though was Phillips Patterns & Castings, a company that was started all the way back in 1947 by my grandfather, Gerald Phillips Jr., it was nothing more than him and a friend in a chicken coop making patterns for the local foundries in the area. Since then it has turned into a fully functioning aluminum foundry that is capable of producing non-ferrous castings from green sand, air set, permanent and die-cast molds, and produce them completely starting from just an idea to finished part ready to ship, without ever leaving the walls of our foundry.

Image Image Image
Image Image Image

DiamondP Racing

We not just a after-market retail company. For the past couple years we have been going out to the local drag strip and racing various cars, but with the creation of DiamondP, our weekend fun has quickly turned into a other sales and advertising outlet. Currently we are racing a 2600lb 750hp Alcohol SuperPro Camaro with a 489 bbc. However with our 671 supercharge getting close to full production we have been considering pulling the 489 and building a rail for more accurate E/T's and dropping a supercharged sbc or bbc into the Camaro as a way to show off how well we make our products.

Heres an in-car video i made of a pass at our local strip in Muncie, IN.





Image
http://www.youtube.com/user/DiamondPIndustries

Image
http://www.facebook.com/pages/Diamond-P ... 3104368019

Image
http://stores.ebay.com/DiamondP-Industries









DiamondP Cal Custom SBC Valve Covers:

http://www.diamondp.com/category_s/130.htm

Image
Image
Image


DiamondP Cal-Custom Valve Covers are 100% Made in the U.S.A., sand cast out of A356.2 Aluminum Alloy at our own foundry In Muncie, IN. They fit gen 1 SBC engines (1958-1985 / 283-400ci) and have CNC machined Spot Faced Bolt Holes and an Over All Material Wall Thickness of a 1/4in. You can order these on our website at http://www.diamondp.com/category_s/130.htm due to the price and time it takes to manufacture these high quality valve covers we keep a low quantity in our inventory so depending on your finishing, your purchase might be on back order.
Part Number: DP-0001
Interchange Part Number: 10X-XXX

Quality: We've found that due to the price of our valve covers that they sell themselves in person much more than they do looking at a picture over the internet, but to tell you the quality on these parts, I will just tell you the how we make them. there are 10 different jobs to do for this one part, all are done directly though our foundry and CNC shop from start to finish except for some finishing’s.(I've personally done 6), 7 of them all involve a different person handling, inspecting and working each individual part, if at any time one of our workers find a a single crack or warp in the casting, scratch in the finish, shrink in the metal, or faulty or scored machining surface the part will be scrapped and reprocessed through our furnaces. We strive to produce the highest quality parts on any market we are in and want our name to be associated with nothing less.

Finishes: While our website may only list a few finishes for our valve covers we are capable of finishing them in and color powder coat, anodized, polished or chrome & with custom inlay color of your choice. You will have to call for a custom finish though; and will be given a quote. 1-(765)-289-2816

Over The Internet Finishes
- Steel Shot Blast
- Real Tree Camo Powder Coat
- Mossy Oak Camo Powder Coat
- Digital Camo Powder Coat
- Polished Aluminum
- Chromed Finish
http://www.diamondp.com/category_s/130.htm









DiamondP 671 Roots Supercharger

http://www.diamondp.com/Diamond_P_Blowe ... _s/122.htm


Image

Back Bearing Plate



Image

front Bearing Plate



Image

2x4 Carb spacer




***Currently***
We only have a two-four carb spacer plate, rear bearing plate in full production; the front gear cover is in the prototype phase and is waiting testing for production. The screw, front bearing plate, and blower housing is completely designed and are waiting to move into prototype and production. I will post more new products periodically as they go into production.


DiamondP 671 supercharger Frontbearing plate is 100% Made in the U.S.A. cast out of A356.2-T6 aluminum alloy, and has a T6 two phase heat treat resulting in a 30% increase in strength from the base casting. Fits any 3-71, 4-71, 6-71, 6v71, 8v71, 6v92, 8v92. This DiamondP product was designed In direct correlation with deans blowers, A company that specializes In blowers, and like all of our products this one was designed to surpass any other plate on the market in quality and strength to insure our customer a 100% satisfaction.

- Shot Blast Finish with Machined Faces
- Bearing bores - 0.005" + 0.000" Tolerance
- Bearing bore diameter: 2.0455"
- Seal bores - 0.001" + 0.000" Tolerance
- Seal bore diameter: 1.8260"
- 100% CMM Inspection to Insure complete casting and CNC perfection
- Part Number: DP-0012
- Interchangeable Part Number: 101-001
http://www.diamondp.com/DP_Front_Bearin ... 01-001.htm



DiamondP 2x4 Supercharger carb adapter plate is a new product from Diamond P Industries' Supercharger product line. It is made from A356.2-T6 sand cast aluminum. The top and bottom surfaces, "DPI" & "USA" are machined finish and the remainder of the carb adapter has a shot blast finish. This DiamondP Product Was Design in Direct Correlation with Deans Blowers, A Company that does nothing but blowers, and like all of our products, this one was designed to surpass any other plate on the market in quality and strength to ensure our customers 100% satisfaction. This product was 100% Made in the U.S.A. 100% Made in the U.S.A.

- A356.2 Cast Aluminum Alloy
- Two Phase T6 Heat Treated, 30% increase strength from base casting.
- Shot Blast Finish with Machined Finish
- 100% American Made
- Part Number: DP-0015
- Interchange Part Number: 100-001
http://www.diamondp.com/2X4_CARB_PLATE_ ... 00-001.htm







DiamondP Ribbed Oval Air Cleaner

http://www.diamondp.com/OVAL_PARTIAL_RI ... 01-001.htm

Image
Image
Image

Oval Partial Ribbed Air Cleaner Fits Carbs with a 5-1/8'' neck. Includes 1/4 - 20 all thread and Diamond P wing nut for attachment. Diamond P prides itself on High Quality American made Parts.

***Air Filter Sold Separately***
- 100% Made In the U.S.A.
- A356.2 Cast Aluminum Alloy
- Fits Carbs with A 5-1/8" Neck
- Includes Top and Bottom Plate with Wing nut
- Over All Material Wall Thickness: 1/4"

Finishes
- Shot Blast
- Real Tree
- Mossy Oak
- Digital Camo
- Polished
- Polished w/ Inlay
Part Number: DP-0009, DP-0010
Interchange Part Number: 100-XXX
http://www.diamondp.com/OVAL_PARTIAL_RI ... 01-001.htm





DiamondP Grenade Shifter Knob Series

http://www.diamondp.com/category_s/128.htm


ImageImageImageImageImageImage

Machined Billet Aluminum Grenade Shift Knob for most manual or automatic transmission applications.

*** Brass Inserts sold separately ***


- 100% Made In the U.S.A.
- 100% CNC Machined
- 6160 billet Aluminum Alloy
- Machined Aluminum Finish
- CNC Brass Inserts Available In The Following Sizes (Sold Separately):
5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14. 7/16-20, 1/2-13, 1/2-20
12mm x 1.25, 12mm x 1.5, 12mm x 1.75
- Inserts Also Available Without Shifter Threads For Custom Installations
- Inserts Universally Fit All DiamondP Shifters

Part Number: DP-0002
Interchange Part Number: XXX-XXX
http://www.diamondp.com/category_s/128.htm



In The Future

Within the next year we plan to have our 671 supercharger finished and into production. We have been getting a lot of feedback from our sbc gen 1 valve covers and a lot of people have been telling us they would love to have 87' up center bolt valve covers and big block valve covers so we will be looking into manufacturing those soon.

I will be posting more products on here as they come out, you can follows us on our YouTube page, Facebook, and ebay if you would like, here are the links:


Image
http://www.youtube.com/user/DiamondPIndustries

Image
http://www.facebook.com/pages/Diamond-P ... 3104368019

Image
http://stores.ebay.com/DiamondP-Industries

Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests