MSD Just put this up, good info on Rotor Phasing so it's all lined up when using retards. If you're pulling timing out when running Nitrous this is pretty important. Joe doesn't show how to do it with a crank trigger but those are pretty easy, you just move the distributor until the rotor tip lines up.
How to Phase your Rotor - Video
Moderator: John_Heard
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: How to Phase your Rotor - Video
dam john your full of good info today thanks once again
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
Re: How to Phase your Rotor - Video
I've found that I've gotten really close by rolling the crank around to the amount of advance I'll have with the step retards triggered and then moving the distributor to line up with the leading edge of the rotor. When I double check it with a light, it rarely needs any adjustment.
Craig Watson
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
Who is online
Users browsing this forum: No registered users and 2 guests