10 element 'diode'
Moderator: Marty Chance
10 element 'diode'
We just upgraded the sprag in the N.C. bolt together from a 5 element (that was screwed up) to the 10 element. first time out we had it too tight, moved 1 shim from front to rear and ran 4.41 and kept tuning at the end of the night we saw 4.30 flat. We are going to loosten it up and move another shim or launch with both stages and see if it can handle it.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
-
- Posts: 193
- Joined: Fri Sep 19, 2008 6:34 am
- Location: Cheney, KS
Re: 10 element 'diode'
after looking at your race pak - throw both stages at it and it will take it. You'll lay down some killer numbers that will scare people! Let us know how you do.
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com
Re: 10 element 'diode'
We went thru the tuneup last night and made a couple minor changes and we'll let'er eat tonite! We'll let you know how it works. Thanks, you guys are great.
Re: 10 element 'diode'
Didn't mean to leave you guys hanging but we've had bad weather and tracks. Anyway we had a race friday and another race sunday. The air was terrific on friday and on the first qualifying pass the tires started smoking about half track and the car sashayed a little as john lifted and it took a hard left hit the jersey wall and exploded into a ball of flame as it was rolling. John is ok. The car is a total loss.
I wanted to come back on here and report that we got into the .20's but that isn't going to happen. Thanks for your interest and help, its a sad day here. oj
I wanted to come back on here and report that we got into the .20's but that isn't going to happen. Thanks for your interest and help, its a sad day here. oj
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: 10 element 'diode'
Sorry to hear that OJ... Good to hear that he didn't get injured.
My 1971 X275 Nova | Facebook
Re: 10 element 'diode'
Wow, so sorry to hear that. Glad no one was hurt.
Craig Watson
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
2QuickNovas Racing
5.23@131
Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts
Who is online
Users browsing this forum: No registered users and 4 guests