Converter ???

One of the most critical areas of a automatic race car

Moderator: Marty Chance

Post Reply
Message
Author
bracketracer
Posts: 329
Joined: Wed Oct 29, 2008 7:14 pm
Location: New Jersey

Converter ???

#1 Post by bracketracer » Thu Dec 18, 2008 7:49 am

Marty, Building a new Motor and will Dyno it. What is need as far as info to build a converter
for this new combination...Thanks

User avatar
Mike Peters
Posts: 930
Joined: Wed Oct 12, 2005 1:48 pm
Location: Wichita, KS

Re: Converter ???

#2 Post by Mike Peters » Thu Dec 18, 2008 8:04 am

You could go to Marty's website and fill out the required information there -

Try this - http://www.racingconverters.com/quote-request.html
"If winning was easy, losers would be doing it"

Marty Chance
Posts: 193
Joined: Fri Sep 19, 2008 6:34 am
Location: Cheney, KS

Re: Converter ???

#3 Post by Marty Chance » Mon Dec 22, 2008 5:05 pm

Bracketracer thanks for the interest in my converter . Mike Peters is right about the quote request , it quick and easy to fill out the information and then i will contact you on the remaining info needed or you can call me and we will go over all your specs. It is very important that you also talk to us direct because the info you provide on the quote request will create as many questions as it answered and the more info we get about your specific application the more accurately we can design the converter the first time. thanks again Marty Chance
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com

bracketracer
Posts: 329
Joined: Wed Oct 29, 2008 7:14 pm
Location: New Jersey

Re: Converter ???

#4 Post by bracketracer » Mon Dec 22, 2008 5:08 pm

Thanks Marty......

Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests