Converter......something is a miss......

One of the most critical areas of a automatic race car

Moderator: Marty Chance

Message
Author
Marty Chance
Posts: 193
Joined: Fri Sep 19, 2008 6:34 am
Location: Cheney, KS

Re: Converter......something is a miss......

#16 Post by Marty Chance » Thu May 07, 2009 9:57 am

before you take it out and send it back, pull the chip and see what it goes to on the brake. This is very important info that will help your converter man set the stall exactly for your motor
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com

User avatar
maydayneal
Posts: 44
Joined: Thu Nov 01, 2007 11:53 am
Location: Lee's Summit, MO

Re: Converter......something is a miss......

#17 Post by maydayneal » Thu May 07, 2009 6:06 pm

Marty Chance wrote:before you take it out and send it back, pull the chip and see what it goes to on the brake. This is very important info that will help your converter man set the stall exactly for your motor
Hey Marty....

I checked the actual stall today.....wow!....It went straight to 6000....not sure what that means relative to me getting it tightened up....but that has to be high for my car...??
Mayday (aka Neal)

Marty Chance
Posts: 193
Joined: Fri Sep 19, 2008 6:34 am
Location: Cheney, KS

Re: Converter......something is a miss......

#18 Post by Marty Chance » Tue May 12, 2009 3:45 pm

if you are shifting at 6200 , that is way too high of stall. Remember when you talk to your converter man about the stall changes to give them ALL the info you can about the motor, car and how you race it and your converter man will be able to give you just what you need .
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com

Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests