Page 1 of 1

Converter???

Posted: Sat Nov 13, 2010 5:36 pm
by bracketracer
Marty, Anyone :scratch: ....Finally was able to make a few passes with new motor and a converter from Marty :smt003 ...Any way it's showing 7% slip in the quarter but I do need to take the 4.56 out and put the 4.30s back in there as it's over 8000rpm at the stripe....How will this affect the slip???
I will post some log files it needed...Thanks guys

Image

Re: Converter???

Posted: Tue Nov 16, 2010 5:00 pm
by Marty Chance
it will increase the slippage , but will bring the rpm down some also

Re: Converter???

Posted: Tue Nov 16, 2010 6:07 pm
by bracketracer
Marty, that was only the 2nd pass on that motor and went 8.13@169mph..No juice just gas and the logger shows 7% slip..Just how much slip am I looking for and how much will it increase?? It's getting cold here so I may not be able to get out again till next year....So do you think stall change should be made to the converter?? Thanks

Re: Converter???

Posted: Wed Nov 17, 2010 6:52 am
by Marty Chance
if you are adding nitrous we need to tighten the converter. Give me a call and i can pull the blue print on your converter and go over exactly how you want to run the car and tune the converter to what you need it to do. Marty 316-542-9869 mon-thurs 5am to 5pm

Re: Converter???

Posted: Thu Nov 18, 2010 4:53 am
by bracketracer
Marty, Not adding any NOS and this is a bracket car..I will give you a call this morning...Thanks