shiming a bolt together

One of the most critical areas of a automatic race car

Moderator: Marty Chance

Post Reply
Message
Author
uwilose
Posts: 1
Joined: Wed Dec 08, 2010 5:53 pm

shiming a bolt together

#1 Post by uwilose » Wed Dec 08, 2010 6:49 pm

i took my neal chance bolt together apart and i never counted how many shims i had on the drive cover.I no i had 2 shims and 1 bearing between the stator and the turbine, so what should i have on the drive cover with the bearing.thanks
Last edited by uwilose on Wed Dec 08, 2010 8:16 pm, edited 1 time in total.

bracketracer
Posts: 329
Joined: Wed Oct 29, 2008 7:14 pm
Location: New Jersey

Re: shiming a bolt together

#2 Post by bracketracer » Wed Dec 08, 2010 7:55 pm

If it's a Chance converter and you never took it apart call Marty he will be able to tell you what shims should be where :scratch:

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: shiming a bolt together

#3 Post by John_Heard » Fri Dec 10, 2010 5:27 pm

FAQ on NCRC's site at http://www.racingconverters.com/assembl ... tions.html should show you what you need. Marty's at PRI in Florida right now, they'll be back in the shop next week sometime.

Marty Chance
Posts: 193
Joined: Fri Sep 19, 2008 6:34 am
Location: Cheney, KS

Re: shiming a bolt together

#4 Post by Marty Chance » Mon Dec 20, 2010 7:05 am

Sorry it has taken so long to reply. Give me the serial number on the converter and i will pull the original blue print (these are kept on record for every Neal Chance converter ever built)
thanks Marty
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!
www.racingconverters.com

Post Reply

Who is online

Users browsing this forum: No registered users and 10 guests