Page 1 of 1
shiming a bolt together
Posted: Wed Dec 08, 2010 6:49 pm
by uwilose
i took my neal chance bolt together apart and i never counted how many shims i had on the drive cover.I no i had 2 shims and 1 bearing between the stator and the turbine, so what should i have on the drive cover with the bearing.thanks
Re: shiming a bolt together
Posted: Wed Dec 08, 2010 7:55 pm
by bracketracer
If it's a Chance converter and you never took it apart call Marty he will be able to tell you what shims should be where
Re: shiming a bolt together
Posted: Fri Dec 10, 2010 5:27 pm
by John_Heard
FAQ on NCRC's site at
http://www.racingconverters.com/assembl ... tions.html should show you what you need. Marty's at PRI in Florida right now, they'll be back in the shop next week sometime.
Re: shiming a bolt together
Posted: Mon Dec 20, 2010 7:05 am
by Marty Chance
Sorry it has taken so long to reply. Give me the serial number on the converter and i will pull the original blue print (these are kept on record for every Neal Chance converter ever built)
thanks Marty