Converter for methanol

One of the most critical areas of a automatic race car

Moderator: Marty Chance

Post Reply
Posts: 9
Joined: Mon Aug 17, 2009 7:45 pm

Converter for methanol

#1 Post by top452 » Wed Nov 30, 2011 7:03 am

Any truth that a converter on mech alky injection should be a little looser than a carb running gas??

User avatar
Marty Chance
Posts: 193
Joined: Fri Sep 19, 2008 6:34 am
Location: Cheney, KS

Re: Converter for methanol

#2 Post by Marty Chance » Wed Nov 30, 2011 7:30 am

that says that you lost low rpm power which should not happen if the mechanical injection is tuned correctly and has proper sized nozzles. Sounds more like a tuning issue. If you are changing to inj alky , i would recommend trying the converter just as it is to get a baseline as to how it works. Also it would be very beneficial to have something on the car that records engine rpm so your converter man can accurately make adjustments after you baseline the converter with the alky.
Neal Chance Racing Converters
Home of the World's Fastest Automatic Doorslammers!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest