Nova trim tip
Posted: Sat Jan 16, 2010 10:39 am
I have seen alot of Novas lately missing the trim that goes around the window on the door itself. I came up with a trick that allowed me to remove mine without damaging it.
I'm sure everyone knows that it's fairly easy to unhook the bottom part of this trim. What I did to release the top was this: I got a thin 4" putty knife, with a little finess your can slip it under the top curled edge of the trim. You do this from the inward side of the door. Then you use a hammer and lightly tap the side edge of the putty knife along. Thi2 seemed to work really well on mine!
Anyways, thought I should share.
Greg
Something to this effect (couldn't find my 4" though)
I'm sure everyone knows that it's fairly easy to unhook the bottom part of this trim. What I did to release the top was this: I got a thin 4" putty knife, with a little finess your can slip it under the top curled edge of the trim. You do this from the inward side of the door. Then you use a hammer and lightly tap the side edge of the putty knife along. Thi2 seemed to work really well on mine!
Anyways, thought I should share.
Greg
Something to this effect (couldn't find my 4" though)