here's a few pics of what we have been working on
Moderator: John_Heard
- camaroman9
- Posts: 234
- Joined: Tue Jan 01, 2008 7:27 pm
- Location: Joplin, MO
here's a few pics of what we have been working on
66 Mustang Convertible Restoration
more pics can be found here..http://s489.photobucket.com/albums/rr25 ... nvertible/
Here's a few pics of an Opel Cadet, i think its actually spelled Kadett or something wierd like that. These are before we painted the stripes on the hood, and finished up the inside of the car.
more pics can be found here..http://s489.photobucket.com/albums/rr25 ... nvertible/
Here's a few pics of an Opel Cadet, i think its actually spelled Kadett or something wierd like that. These are before we painted the stripes on the hood, and finished up the inside of the car.
C&S carbureted 388 SBC, PT106, TH400, e85
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: here's a few pics of what we have been working on
Robert just finished my hood, fenders and bumpers too..
My 1971 X275 Nova | Facebook
Re: here's a few pics of what we have been working on
Looking at all the paint work makes me want to paint my 66 Fastback before Pinks in Topeka in July.
Re: here's a few pics of what we have been working on
Jon, is that a little rail rash on your door??
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: here's a few pics of what we have been working on
Just a little, it's ok it'll buff out..
My 1971 X275 Nova | Facebook
- TubbedTruck67
- Posts: 374
- Joined: Wed Oct 25, 2006 11:59 am
- Location: Joplin, Mo
Re: here's a few pics of what we have been working on
Is mine next in line to come in and get the rail rash fixed? lol
- camaroman9
- Posts: 234
- Joined: Tue Jan 01, 2008 7:27 pm
- Location: Joplin, MO
Re: here's a few pics of what we have been working on
that's the plan. as soon as i get done with yours, i'm going to start on mine. VFN called friday and my hood is supposed to be here tomorrow.
C&S carbureted 388 SBC, PT106, TH400, e85
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
Re: here's a few pics of what we have been working on
I saw that video. Made me nauseaus, that's terrible to have happen. But it may take more than a buffer..eeessshhhhh You'll be track ready for the 10 seaon right?TubbedTruck67 wrote:Is mine next in line to come in and get the rail rash fixed? lol
73 Vette, moly back half
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
Pump gas 496
Two Pro Systems 950's
Chance 6000 converter
- TubbedTruck67
- Posts: 374
- Joined: Wed Oct 25, 2006 11:59 am
- Location: Joplin, Mo
Re: here's a few pics of what we have been working on
Yes Ill be out for the 2010 season one way or another. Its suposed to be going into the bodyshop sometime this week. The cars all back in one piece I raced it again after that last year once. Its just not painted again yet its a multicolored beast right now.Hitchcock wrote:I saw that video. Made me nauseaus, that's terrible to have happen. But it may take more than a buffer..eeessshhhhh You'll be track ready for the 10 seaon right?TubbedTruck67 wrote:Is mine next in line to come in and get the rail rash fixed? lol
- camaroman9
- Posts: 234
- Joined: Tue Jan 01, 2008 7:27 pm
- Location: Joplin, MO
Re: here's a few pics of what we have been working on
Here's some updated pics of the 66 Mustang that we sent home yesterday for the owner to finish the motor, trans, wiring, interior, and trim work.
more pics can be found here http://s489.photobucket.com/albums/rr25 ... nvertible/
more pics can be found here http://s489.photobucket.com/albums/rr25 ... nvertible/
C&S carbureted 388 SBC, PT106, TH400, e85
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
- camaroman9
- Posts: 234
- Joined: Tue Jan 01, 2008 7:27 pm
- Location: Joplin, MO
Re: here's a few pics of what we have been working on
btw, these were all taken with my iphone so the resolution isn't the best, but it'll work i guess.
C&S carbureted 388 SBC, PT106, TH400, e85
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
Re: here's a few pics of what we have been working on
Typical Mustang with a lot of rust, what kind of money do you get for a full body resto and paint like that. Very nice work btw.
- camaroman9
- Posts: 234
- Joined: Tue Jan 01, 2008 7:27 pm
- Location: Joplin, MO
Re: here's a few pics of what we have been working on
That car came into the shop on a rotisserie and sprayed in epoxy timer. We usually charge around 7000 to do metal work, rust repair, body work, paint, and assemble the car like the one above. We thought about charging hourly, but we just can't see charging a customer 10 or 12000 dollars for a paint job.
C&S carbureted 388 SBC, PT106, TH400, e85
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
http://www.timsbodyandglass.com
Special thanks to:
Bentune Performance & Fabrication (417)483-5584
Performance Coatings + (417)439-0546
C&R Transmission (417)736-2191
Re: here's a few pics of what we have been working on
$7000 is a great price for that much work we usually get the 10-15k for paint on cars and thats without rust repair.Its a hard call to try and charge by the hour when some cars take 300-500 hours just for bodywork and paint.camaroman9 wrote:That car came into the shop on a rotisserie and sprayed in epoxy timer. We usually charge around 7000 to do metal work, rust repair, body work, paint, and assemble the car like the one above. We thought about charging hourly, but we just can't see charging a customer 10 or 12000 dollars for a paint job.
Who is online
Users browsing this forum: No registered users and 7 guests