Retrofitting a Tuned Port Injection

General Engine Discussion

Moderator: John_Heard

Post Reply
Message
Author
FastTrack
Posts: 3
Joined: Thu May 12, 2005 11:14 am
Location: Warsaw Indiana

Retrofitting a Tuned Port Injection

#1 Post by FastTrack » Mon Oct 17, 2005 8:44 pm

Hi, I have a TPI from an 85 Monte carlo. It was on a 305. I have the wire, computer, and all of the sensors. Has anybody made this swap?
I got a book on it but things go wrong and I can always use any advise.
If we can't make it we can talk about it.

Fultron
Posts: 2
Joined: Mon Oct 17, 2005 6:07 pm

#2 Post by Fultron » Wed Oct 19, 2005 5:28 pm

What are you putting it in?

Its been my experience that the factory wiring harness is just a waist of wires. I would get a new harness from Painless Wiring to fit your application and you won't have any problems.

IMO

mtr head

tpi swap

#3 Post by mtr head » Mon Oct 31, 2005 4:25 pm

u have to id what tpi u have there are several. p.s. none came on montes from factory

Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests