restrictor plate racing

General Engine Discussion

Moderator: John_Heard

Post Reply
Message
Author
User avatar
The ORIGINAL 1320racer
Posts: 79
Joined: Wed Mar 19, 2008 9:29 am

restrictor plate racing

#1 Post by The ORIGINAL 1320racer » Sun Jun 22, 2008 9:03 am

running a 1 1/4" bore(s) restrictor plate...

http://pictures.aol.com/ap/singleImage. ... p5Fd3Ig%3D

http://www.youtube.com/watch?v=rbKYio6OvKM

1.51 60' tripping the beams with the back tires, deep staged in 3044' air!

Last night...1.49 60' again tripping the beams with the back tires, deep staged!

NO drag shocks, air bags, anti-roll bar, tubular A arms, rim screws, tubes, trick springs, a Ford 9", line lock, aluminum rods, gapless rings, belt drive, crank trigger, vacuum pump, dominator carb, Demon carb, alky carb, toilet, K&N air filter/lid, split fire plugs, a magic stick from any of the internet self proclaimed cam gurus, big tube headers, powerglide trans, transbrake, spragless converter, aftermarket shifter, electric fan(s), electric water pump, sumped tank, fuel cell, fire hose fuel lines, a fuel pump cable of feeding a Pro Stock engine and last but not least...the battery ain't in the trunk!
Image

1.20 60 foot(footbrake)
8.95 @ 148.69
5.65 @ 119.82
3124 lb. '02 Firebird

http://www.youtube.com/watch?v=rbKYio6OvKM

1.28 60 foot
9.89 @ 134.93 n/a
6.26 @ 109.40
3870 lbs.

Post Reply

Who is online

Users browsing this forum: No registered users and 30 guests