HOW MANY RUNS DO YOU GO BEFORE ( RINGS AND BEARING ) ?

[dragrace67camro]

HOW MANY RUNS DO YOU GO BEFORE ( RINGS AND BEARING ) ?

how many run before new pistons and Rods ?

thanks

[vegaracer]

This year its been every other pass
But rings and bearings usually every winter, and have never had a motor together long enough to worry about rods and pistons.

[sunsation540]

ring and brgs bearing unwanted dissiambley LOL around 150 runs,, a full season we check springs and valves and change oil every 30-40 passes pistons when the ware says it's time +.002 wall clearance ring land clearance issues pin fit and such, rods every 400 runs i pitch them out and black light the crank when it gets polished every time it's out with the power we make nowdays.

[dragrace67camro]

ring and brgs bearing unwanted dissiambley LOL around 150 runs,, a full season we check springs and valves and change oil every 30-40 passes pistons when the ware says it's time +.002 wall clearance ring land clearance issues pin fit and such, rods every 400 runs i pitch them out and black light the crank when it gets polished every time it's out with the power we make nowdays.

Ok that sounds pretty good going to try and make a Full Season on rings and bearing and valve springs about 200-225 runs and then sounds like every other year rods and pistons when they show wear -

I try to get a full season out of transmission but not been able to YET !! GRRR .

I do my oil ever 20 passed Lucas 20/50 with Lucas stablizer both synthetic and transmission every 40 passed or so

[wikd69]

ring and brgs bearing unwanted dissiambley LOL around 150 runs,, a full season we check springs and valves and change oil every 30-40 passes pistons when the ware says it's time +.002 wall clearance ring land clearance issues pin fit and such, rods every 400 runs i pitch them out and black light the crank when it gets polished every time it's out with the power we make nowdays.

Ok that sounds pretty good going to try and make a Full Season on rings and bearing and valve springs about 200-225 runs and then sounds like every other year rods and pistons when they show wear -

I try to get a full season out of transmission but not been able to YET !! GRRR .

I do my oil ever 20 passed Lucas 20/50 with Lucas stablizer both synthetic and transmission every 40 passed or so

What trans are you running ?

[dragrace67camro]

ring and brgs bearing unwanted dissiambley LOL around 150 runs,, a full season we check springs and valves and change oil every 30-40 passes pistons when the ware says it's time +.002 wall clearance ring land clearance issues pin fit and such, rods every 400 runs i pitch them out and black light the crank when it gets polished every time it's out with the power we make nowdays.

Ok that sounds pretty good going to try and make a Full Season on rings and bearing and valve springs about 200-225 runs and then sounds like every other year rods and pistons when they show wear -

I try to get a full season out of transmission but not been able to YET !! GRRR .

I do my oil ever 20 passed Lucas 20/50 with Lucas stablizer both synthetic and transmission every 40 passed or so

What trans are you running ?

2 speed Glide