HEADER GASKETS

Message

79 Camaro · #1 Post by **79 Camaro** » Fri Mar 12, 2010 5:20 pm

I just got a set of Lemons Headers and i am wanting to know what hearder gaskets you all are using.

I was reading in my Lemons headers handbook they sent and Dan lemons recommends a flat copper gasket with the ARP stainless bolts that are longer then a standard bolt because of the thick flange..

Give me some inputs on this

Thanks!!

Young Gun

#2 Post by **John_Heard** » Fri Mar 12, 2010 9:46 pm

I've been using a set of Fel-Pros, the blue ones for quite some time. They work fine, header bolts just cheap Mr. Gaskets - but do pay attention to the length. Just keep them tight and they'll do fine.

aitch o · #3 Post by **aitch o** » Sun Mar 14, 2010 10:19 am

gaskets in a tube.
permatex red.

supernova · #4 Post by **supernova** » Sun Mar 14, 2010 10:59 am

Fel-Pro 1412, work fine for me......

sg7365 · #5 Post by **sg7365** » Sun Mar 14, 2010 11:39 am

I have not used exhaust gaskets in years.

Your best bet is with a High Temp RTV Silicone Gasket Maker, like the others have said.

I have been using the Permatex 26B stuff with never a problem.

Follow the directions on the tube and you won't have a problem.

Ron

79 Camaro · #6 Post by **79 Camaro** » Sun Mar 14, 2010 12:52 pm

Thanks guys!! i appreciate all the replies!!

Thanks again,

Adam

Hitchcock · #7 Post by **Hitchcock** » Sun Mar 14, 2010 3:18 pm

79 Camaro wrote:I just got a set of Lemons Headers and i am wanting to know what hearder gaskets you all are using.

I was reading in my Lemons headers handbook they sent and Dan lemons recommends a flat copper gasket with the ARP stainless bolts that are longer then a standard bolt because of the thick flange..

Give me some inputs on this

Thanks!!

Young Gun

How are the Lemons headers. I want some really bad cause I dont think I will be able to talk tigwelder into a sponsored set of fabbed ones.

julven · #8 Post by **julven** » Sun Mar 14, 2010 6:01 pm

I have always used the copper ones like he sells.I bought a set from Dan last but I have run the Mr Gasket and Percys aluminum.

79 Camaro · #9 Post by **79 Camaro** » Sun Mar 14, 2010 10:41 pm

Hitchcock wrote:
79 Camaro wrote:I just got a set of Lemons Headers and i am wanting to know what hearder gaskets you all are using.

I was reading in my Lemons headers handbook they sent and Dan lemons recommends a flat copper gasket with the ARP stainless bolts that are longer then a standard bolt because of the thick flange..

Give me some inputs on this

Thanks!!

Young Gun

How are the Lemons headers. I want some really bad cause I dont think I will be able to talk tigwelder into a sponsored set of fabbed ones.

They are Very nice!! I have not test fitted them yet so not sure how they fit.. I am sure they will fit nice like everyone says.

Hitchcock · #10 Post by **Hitchcock** » Sun Mar 14, 2010 10:51 pm

Your gonna post some pics of the new bling right :bling:

79 Camaro · #11 Post by **79 Camaro** » Mon Mar 15, 2010 6:06 pm

Yeah, after i test fit them and get them coated and re-installed i will post some pics

HEADER GASKETS

HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Re: HEADER GASKETS

Who is online