Looking for cam suggestions for a 6-71 sbc 355
was running high 10's with an isky .485 lit 300 duration 20 year old cam and stock gm 2.02 1.60 heads.
looking to go to maybe a nitrous hp 507 525 lift comp cam and patriot 2.08 1.60 aluminum heads
any suggestions
this is a street car that gets raced once in a while
cam and head suggestions for a 6-71 blower sbc
Moderator: John_Heard
cam and head suggestions for a 6-71 blower sbc
Street car Old motor 10.80 @122 1.49 60' 355 6-71 stock gm heads stock rocker arms block hugger headers 1-5/8"x2.5" collector
the car ran in the 9's in the 60's with an olds motor.
the car ran in the 9's in the 60's with an olds motor.
- CDR Performance
- Posts: 147
- Joined: Tue Mar 02, 2010 7:41 pm
- Location: Indianapolis, Indiana
Re: cam and head suggestions for a 6-71 blower sbc
RHS makes a good budget head.
I would get a custom cam built for the app.
I would get a custom cam built for the app.
CDR PERFORMANCE
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
Re: cam and head suggestions for a 6-71 blower sbc
about how much for the budget heads?CDR Performance wrote:RHS makes a good budget head.
I would get a custom cam built for the app.
and is it worth going roller
where can I get the best blower cam grind would I have to supply the specs
Street car Old motor 10.80 @122 1.49 60' 355 6-71 stock gm heads stock rocker arms block hugger headers 1-5/8"x2.5" collector
the car ran in the 9's in the 60's with an olds motor.
the car ran in the 9's in the 60's with an olds motor.
- CDR Performance
- Posts: 147
- Joined: Tue Mar 02, 2010 7:41 pm
- Location: Indianapolis, Indiana
Re: cam and head suggestions for a 6-71 blower sbc
prostude wrote:about how much for the budget heads?CDR Performance wrote:RHS makes a good budget head.
I would get a custom cam built for the app.
and is it worth going roller
where can I get the best blower cam grind would I have to supply the specs
RHS Pro Action are About $450 bare or $650-690 assy each.
Cams, A roller is almost always a better choice. You can get more lift and quicker valve events.
Specs, Give me all the specs on you combo or go the this link and fill in the black and pm or email it.
http://www.cdrperformance.biz/customcam-shafts.html
And we can will spec a cam and talk to our builder "CustomCams".
CDR PERFORMANCE
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
The Custom Engine Shop
Dart - Callies - BRC - Oliver - BME - Custom Cams - T&D - Trend - JGS - BorgWarner - SuperNatural - EV - CSU - C&S - BS3
http://www.cdrperformance.biz
Who is online
Users browsing this forum: No registered users and 9 guests