ProComp Shaft Rockers for BBC

General Engine Discussion

Moderator: John_Heard

Message
Author
User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: ProComp Shaft Rockers for BBC

#16 Post by wikd69 » Tue Sep 07, 2010 12:03 am

supernova wrote:
wikd69 wrote:
supernova wrote:The funny thing is Harry's new cam is going to be about the same size as mine, around .714 lift. My springs are Comp 996 springs. I'm not a beleaver in over caming motors. Everthing in my motor is smaller than you would think......
Are you sure that motor was built in Texas ? <bland look> :mrgreen:

My new heads have K&M K-1000H springs in them. Lots of spring.

http://www.summitracing.com/parts/KMO-K-1000H/
Your springs are so close to mine it's not even funny.....
Are you sure your not trying to put a blower on my motor???????? :smt003
I'm thinking you're running a bit too much compression for that :mrgreen:
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

User avatar
supernova
Posts: 2552
Joined: Sat Feb 02, 2008 7:35 pm
Location: Ft.Worth Tx

Re: ProComp Shaft Rockers for BBC

#17 Post by supernova » Tue Sep 07, 2010 5:40 am

I can find fuel to cover that!!!!! :smt003 :smt003 :smt003 :smt003 :smt003
Blackhoodmafia!!!! :mrgreen: :mrgreen:

1972 Nova SS
572 C.I. BBC

Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs

User avatar
Moparious Maximus
Posts: 125
Joined: Mon Oct 05, 2009 6:05 pm
Location: Iowa

Re: ProComp Shaft Rockers for BBC

#18 Post by Moparious Maximus » Tue Sep 07, 2010 8:47 am

Shaft style rockers are great, but I would'nt trust procomps.

T&D or Jessel, are the only ones I would trust.

I went the T&D route years ago, and still running the same set, .752 lift, 8500 rpm big wedge blower motor.

I had a tranny go dumb on me, the motor went to 10,500, didnt hurt a thing. I hate this video but this is the pass, sounds bad when it did it. http://www.youtube.com/watch?v=es8vwiTGHuk
'63 Plymouth, Straight axle, Leaf springs, Drum brakes, 31x10.5wx15 Rears 3215lbs
Best time to date 7.99 @ 170 mph
572" Wedge 8-71 @ 28% OD, ALKY, Glide, Dana

http://www.youtube.com/watch?v=vq-xzFWHtFk
http://www.youtube.com/watch?v=JfyZSw59R_o

Post Reply

Who is online

Users browsing this forum: Google [Bot] and 19 guests