Question on oil.

General Engine Discussion

Moderator: John_Heard

Post Reply
Message
Author
User avatar
stig
Posts: 7
Joined: Sat Dec 11, 2010 9:11 am
Location: Moscow Russia \Чертаново-Южное
Contact:

Question on oil.

#1 Post by stig » Thu Jan 26, 2012 2:42 pm

Prompt who uses additives in oil for the best work of the engine on NOS
Or is better it is not necessary to apply additives?
And as, what oils use? Also that you can tell about oil Bardahl

I apologize for my English. :oops:

User avatar
stig
Posts: 7
Joined: Sat Dec 11, 2010 9:11 am
Location: Moscow Russia \Чертаново-Южное
Contact:

Re: Question on oil.

#2 Post by stig » Sat Jan 28, 2012 3:03 am

Whether it would be desirable to learn friends you use in alcohol motors what or additives or additives in oil.

User avatar
ruquick
Posts: 8
Joined: Mon Nov 22, 2010 4:32 am
Location: Deer Park, Texas
Contact:

Re: Question on oil.

#3 Post by ruquick » Sat Jan 28, 2012 9:54 am

I have had good results with Brad Penn (20w-50) and Joe Gibbs (XP1) oil. I don't use any extra additives. What fuel are you using?
417" Brodix Track 1X naturally aspirated @ 2900 lbs

1.26 60' 5.78@117 → → http://www.youtube.com/watch?v=gfjkNF0SrKU

User avatar
supernova
Posts: 2552
Joined: Sat Feb 02, 2008 7:35 pm
Location: Ft.Worth Tx

Re: Question on oil.

#4 Post by supernova » Sat Jan 28, 2012 10:44 am

I use VR-1 Valvoline 10-30w, good additives low cost.
Blackhoodmafia!!!! :mrgreen: :mrgreen:

1972 Nova SS
572 C.I. BBC

Best to date: 1/8
et: 5.28
mph: 134
new wt. 3340 lbs

User avatar
stig
Posts: 7
Joined: Sat Dec 11, 2010 9:11 am
Location: Moscow Russia \Чертаново-Южное
Contact:

Re: Question on oil.

#5 Post by stig » Sat Jan 28, 2012 11:50 am

In last season we used М3 and oil (15w-50) the engine dohs an injector.
Valvoline we don't trust, at us on sale it is a lot of fake.
We use Motul at the checked up dealers.
There was new oil Bardahi that will tell who uses?

Now there is time what to communicate and learn on more. Thanks for answers.

Winter season and temperature-15С we gather for races on an autocross.
Last edited by stig on Mon Jan 30, 2012 1:10 pm, edited 1 time in total.

User avatar
stig
Posts: 7
Joined: Sat Dec 11, 2010 9:11 am
Location: Moscow Russia \Чертаново-Южное
Contact:

Re: Question on oil.

#6 Post by stig » Sat Jan 28, 2012 4:02 pm

VR1 Engine oil is excellent.
I didn't hear thanks Brad Penn

User avatar
wikd69
Posts: 2077
Joined: Sat Feb 23, 2008 12:42 pm
Location: Rocklin, CA
Contact:

Re: Question on oil.

#7 Post by wikd69 » Sat Jan 28, 2012 4:53 pm

supernova wrote:I use VR-1 Valvoline 10-30w, good additives low cost.
Yep, me too. When it gets super hot here in the summer I switch to 20-50w...
1969 ProStreet Camaro RS Best 9.75@139 1.46 60'
Blown 427 BBC, TH400 w/Brake, Back-Half Ladderbar
Narrowed 12-Bolt, 4.10 Gears, Spool, Moser 33 Spline

http://www.marsh-racing.com/harrys_camaro-1.htm

572 BBC
Posts: 105
Joined: Wed Nov 26, 2008 1:43 pm

Re: Question on oil.

#8 Post by 572 BBC » Wed Feb 08, 2012 4:29 am

find brad penn oil, its good stuff. stays slippery when contaminated with gas. copy and paste below


http://www.google.com/products?q=brad+penn+oil&hl=en

HPDRIFTER
Posts: 157
Joined: Thu Aug 17, 2006 11:47 am
Location: High Plains

Re: Question on oil.

#9 Post by HPDRIFTER » Wed Feb 08, 2012 10:03 am

A new member from Moscow, Russia! That's cool.

User avatar
Craig W.
Posts: 1257
Joined: Thu May 12, 2005 11:01 am
Location: Columbia, KY
Contact:

Re: Question on oil.

#10 Post by Craig W. » Sat Feb 11, 2012 7:23 am

I switched to Brad Penn last year. It came highly recommended by a few guys I trust. I haven't had the engine apart to check the bearings yet.
Craig Watson
2QuickNovas Racing
5.23@131

Sponsors:
AEM Electronics
Carnivore Performance
Rapp Racing
VFN Fiberglass
Fast Shafts

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: Question on oil.

#11 Post by John_Heard » Sat Feb 11, 2012 7:35 am

Friend of mine bought several cases of Brad Penn for $53 ea, seems to be about the going rate around here.

want-a-be
Posts: 189
Joined: Tue Feb 05, 2008 11:04 pm
Location: Southern Illinois

Re: Question on oil.

#12 Post by want-a-be » Sun Feb 12, 2012 6:34 pm

I've ran Valvoline since i was a kid,...sniff about 35 years now :cry: ,... and have had nothing but good luck with it. Man it sux getting old.

Don

User avatar
Bruce69Camaro
Posts: 1799
Joined: Thu Jul 23, 2009 11:07 am
Location: PA

Re: Question on oil.

#13 Post by Bruce69Camaro » Mon Feb 13, 2012 5:15 am

My engine guy swears by Brad Penn oil and is even a dealer for them.

The price seems to be very compatiable with other brands.

I'd like to know what makes it so special?

Добро пожаловать на наш новый друг из России (Did I say this correctly?)
Those who think they know it all have no way of finding out they don't......... :scratch:

HPDRIFTER
Posts: 157
Joined: Thu Aug 17, 2006 11:47 am
Location: High Plains

Re: Question on oil.

#14 Post by HPDRIFTER » Mon Feb 13, 2012 10:23 am

want-a-be wrote:I've ran Valvoline since i was a kid,...sniff about 35 years now :cry: ,... and have had nothing but good luck with it. Man it sux getting old.

Don

Suck it up, Don! It beats the alternative!

572 BBC
Posts: 105
Joined: Wed Nov 26, 2008 1:43 pm

Re: Question on oil.

#15 Post by 572 BBC » Sat Mar 24, 2012 3:17 am

Bruce69Camaro wrote:My engine guy swears by Brad Penn oil and is even a dealer for them.

The price seems to be very compatiable with other brands.

I'd like to know what makes it so special?

Добро пожаловать на наш новый друг из России (Did I say this correctly?)
it stays slippery when contaminated. and the 20/50 stuff clings like mad!!!!!!! im a believer!!!

Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests