Page 1 of 1
Question on oil.
Posted: Thu Jan 26, 2012 2:42 pm
by stig
Prompt who uses additives in oil for the best work of the engine on NOS
Or is better it is not necessary to apply additives?
And as, what oils use? Also that you can tell about oil Bardahl
I apologize for my English.
Re: Question on oil.
Posted: Sat Jan 28, 2012 3:03 am
by stig
Whether it would be desirable to learn friends you use in alcohol motors what or additives or additives in oil.
Re: Question on oil.
Posted: Sat Jan 28, 2012 9:54 am
by ruquick
I have had good results with Brad Penn (20w-50) and Joe Gibbs (XP1) oil. I don't use any extra additives. What fuel are you using?
Re: Question on oil.
Posted: Sat Jan 28, 2012 10:44 am
by supernova
I use VR-1 Valvoline 10-30w, good additives low cost.
Re: Question on oil.
Posted: Sat Jan 28, 2012 11:50 am
by stig
In last season we used М3 and oil (15w-50) the engine dohs an injector.
Valvoline we don't trust, at us on sale it is a lot of fake.
We use Motul at the checked up dealers.
There was new oil Bardahi that will tell who uses?
Now there is time what to communicate and learn on more. Thanks for answers.
Winter season and temperature-15С we gather for races on an autocross.
Re: Question on oil.
Posted: Sat Jan 28, 2012 4:02 pm
by stig
VR1 Engine oil is excellent.
I didn't hear thanks Brad Penn
Re: Question on oil.
Posted: Sat Jan 28, 2012 4:53 pm
by wikd69
supernova wrote:I use VR-1 Valvoline 10-30w, good additives low cost.
Yep, me too. When it gets super hot here in the summer I switch to 20-50w...
Re: Question on oil.
Posted: Wed Feb 08, 2012 4:29 am
by 572 BBC
find brad penn oil, its good stuff. stays slippery when contaminated with gas. copy and paste below
http://www.google.com/products?q=brad+penn+oil&hl=en
Re: Question on oil.
Posted: Wed Feb 08, 2012 10:03 am
by HPDRIFTER
A new member from Moscow, Russia! That's cool.
Re: Question on oil.
Posted: Sat Feb 11, 2012 7:23 am
by Craig W.
I switched to Brad Penn last year. It came highly recommended by a few guys I trust. I haven't had the engine apart to check the bearings yet.
Re: Question on oil.
Posted: Sat Feb 11, 2012 7:35 am
by John_Heard
Friend of mine bought several cases of Brad Penn for $53 ea, seems to be about the going rate around here.
Re: Question on oil.
Posted: Sun Feb 12, 2012 6:34 pm
by want-a-be
I've ran Valvoline since i was a kid,...sniff about 35 years now
,... and have had nothing but good luck with it. Man it sux getting old.
Don
Re: Question on oil.
Posted: Mon Feb 13, 2012 5:15 am
by Bruce69Camaro
My engine guy swears by Brad Penn oil and is even a dealer for them.
The price seems to be very compatiable with other brands.
I'd like to know what makes it so special?
Добро пожаловать на наш новый друг из России (Did I say this correctly?)
Re: Question on oil.
Posted: Mon Feb 13, 2012 10:23 am
by HPDRIFTER
want-a-be wrote:I've ran Valvoline since i was a kid,...sniff about 35 years now
,... and have had nothing but good luck with it. Man it sux getting old.
Don
Suck it up, Don! It beats the alternative!
Re: Question on oil.
Posted: Sat Mar 24, 2012 3:17 am
by 572 BBC
Bruce69Camaro wrote:My engine guy swears by Brad Penn oil and is even a dealer for them.
The price seems to be very compatiable with other brands.
I'd like to know what makes it so special?
Добро пожаловать на наш новый друг из России (Did I say this correctly?)
it stays slippery when contaminated. and the 20/50 stuff clings like mad!!!!!!! im a believer!!!