DragStuff

I have a 71 chevelle with a 350. bored 30 over. 194 double hump heads which I have worked. they're angle milled and what not. I have a Holley 650 dp carb, Holley contender intake, crane fireball cam. I have a victor jr and a Holley 750 vs on the shelf. would that make a better combo with that cam? also has 456 gears. I run the 1/8th mile

For that motor, I think the 650 and contender would be the better set up. The motor is a low rpm engine and the smaller intake and carb will help the low end torque. If you want, you could try the 750 on the contender.