reg for nos?

General Nitrous Discussion

Moderator: John_Heard

Post Reply
Message
Author
roadrunner451
Posts: 44
Joined: Mon Oct 22, 2007 5:51 pm
Location: michigan
Contact:

reg for nos?

#1 Post by roadrunner451 » Sat Dec 08, 2007 2:23 pm

im running the aeromotive 1000 im wondering if i can use a tee before my aeromotive regulator for a 100 150 shot and which reg should i use im running the NX kit which they want the fuel pressures at 9 or 10 psi. the 1000 pump delivers 45psi.i dont beleive a holley would work because of the high fuel pressure any ideas ..
mike , 1970 road runner 451 cu in indy 440-1 cyl heads, solid roller cam,T&D rockers 11.12 at 120 mph on motor.

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

#2 Post by John_Heard » Sat Dec 08, 2007 8:28 pm

Call Jeff Prock at Applied Nitrous - http://www.appliednitroustechnology.com/ and get one of his modified hi-pressure holley regulators.

roadrunner451
Posts: 44
Joined: Mon Oct 22, 2007 5:51 pm
Location: michigan
Contact:

#3 Post by roadrunner451 » Mon Dec 10, 2007 7:36 pm

i called jeff and ordered a reg from him . ill see it thursday with all the fittings on it , thanks john
mike , 1970 road runner 451 cu in indy 440-1 cyl heads, solid roller cam,T&D rockers 11.12 at 120 mph on motor.

User avatar
John_Heard
Site Admin
Posts: 5734
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

#4 Post by John_Heard » Mon Dec 10, 2007 9:10 pm

That's a good piece and will serve you well.

Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests