Jetting ?????
Moderator: John_Heard
I had a chance to run it last night with 88/88 and it only picked up1 100th of a second and 2 mph seem like it was just like yall said rich ass hell .
I trying to deside weath to keep the same fuel jet and go up on the no2 or go smaller fuel. The car ran great no prob with the set up now im just wandering if and how much im leaving on the table.
I trying to deside weath to keep the same fuel jet and go up on the no2 or go smaller fuel. The car ran great no prob with the set up now im just wandering if and how much im leaving on the table.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Jetting ?????
So John what do you think ? Bigger on no2 or smaller on the fuel? Any is welcome to weigh in on this .
Thanks
David
Thanks
David
Re: Jetting ?????
(any one) sorry my fingers cant keep up with my mind .
Re: Jetting ?????
1/100th of a second? .01 seconds? You should have picked up more than that on a 50 shot. Something does sound strange. Hell, I'm happy with mine if it repeats within a hundreth of a second on motor alone. Are you sure it was spraying at all? Or did it spray and then cut out? How much timing are you pulling out of it for the spray? I would worry why I only picked up .01 and 2 mph before I worried about what size jets to go with next!!
Keep us posted.
Keep us posted.
'87 S10 stock suspension, Caltracs, 9" rearend, 1.82 Glide, 383 SBC,
Brodix Track1 Heads, 14:1 compression, 180 shot plate,
2" tube Hussler Headers, 1.38 60ft., 6.20 ET 1/8th, 109 MPH,
Still Tuning, more to come.
Brodix Track1 Heads, 14:1 compression, 180 shot plate,
2" tube Hussler Headers, 1.38 60ft., 6.20 ET 1/8th, 109 MPH,
Still Tuning, more to come.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Jetting ?????
Might clarify how much it picked up, if it was only 2 mph on that big of a shot, somethin's wrong. Is that over your other smaller shot or over motor only? To lean it out you can lower the fuel pressure (where are you now?) or increase the nitrous jet or put a smaller fuel jet in it. How much total timing (with retards) are you using when spraying?
My 1971 X275 Nova | Facebook
Re: Jetting ?????
Well I was running sniper system it has very small silinods and they were maxed out at i think 175 hp shot . I tryed to get a little more out that system by taking a hobbie drill and opening the jets out but that was no help. I bought the cheater silinoids and upped the jet sizes to were they are now. Im running 5.5 to 6 psi on the fuel flowing. It is dead headed now .My brother said it put out a cloud of black smoke when I took off. Oh im pulling out 8 degrees with a retard box .
David
David
Re: Jetting ?????
For a 150 shot, using NOS jets, it should be a .082 Nitrous jet, a .071 Fuel jet, and 5.5 psi fuel pressure. (IMO) If deadheading the regulator, I pull the plate and set the pressure with the fuel spraying in a bucket through the plate. That way you have the correct fuel pressure when you pull the trigger...
Trucks are for haulin...
Re: Jetting ?????
Yeah Ill do that tomorrow .Did you build you truck or buy it? The reason I ask is there used to be one running around in Mobile Alabama that was just like yours.
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Jetting ?????
So it was 2 mph faster than the 175 shot system right?
My 1971 X275 Nova | Facebook
Re: Jetting ?????
Allmost it was 96.75 to a 99.08 and the same 60ft. I would like to test tonight Im just trying to deside the right way to go with the jets.
Who is online
Users browsing this forum: No registered users and 21 guests