Koehler Nitrous Master
Moderator: John_Heard
-
- Posts: 111
- Joined: Mon Nov 17, 2008 11:38 pm
Koehler Nitrous Master
How many of you guys own/use the Kholer Nitrous Master? Is it worth the cash? I was also thinking of purchasing a good flow tool, would the digital one they sell be overkill, or sould i just make my own and call it close enough? Thanks for any opinions in advance!
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Koehler Nitrous Master
I have Dave's program and use it frequently. Consider it a handy dandy calculator that you can whip out at a minutes notice and look at how pressure and jet size effects lbs per hr measurements. Highly recommend it. It also has a lot of information in the help files that is very good.
On the other hand, I'll give the digital flow tool a thumbs down. Sorry Dave... I just don't like those digital gauges, instead buy you something with a large diameter industrial test gauge, you can make your own flow tool easy enough. They are easier to read with more resolution.
On the other hand, I'll give the digital flow tool a thumbs down. Sorry Dave... I just don't like those digital gauges, instead buy you something with a large diameter industrial test gauge, you can make your own flow tool easy enough. They are easier to read with more resolution.
My 1971 X275 Nova | Facebook
Re: Koehler Nitrous Master
i have the nitrous master and it is a cool tool like john said you can learn alot from it
best to date N/A 8.91@153
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
psca westcoast heads up racing open comp
67 Camaro RS/SS
BBC Powerglide 4800 stall 4.11 29.5x10.5W
http://www.chpdragracing.com
-
- Posts: 111
- Joined: Mon Nov 17, 2008 11:38 pm
Re: Koehler Nitrous Master
OK rate on thanks guys. John, I know you use a W.O.N kit or two, so how would you convert the Jet size over from the non conventonal one they use? Do you have a set of machinist pin gauges?
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Koehler Nitrous Master
I have a conversion chart from the Highpower jets to standard jet size somewhere. I'll see if I can find it for you.
My 1971 X275 Nova | Facebook
-
- Posts: 111
- Joined: Mon Nov 17, 2008 11:38 pm
Re: Koehler Nitrous Master
Sweet, that would be a great help. Thanks John
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
Re: Koehler Nitrous Master
Check your email, just sent the spreadsheet.
My 1971 X275 Nova | Facebook
-
- Posts: 111
- Joined: Mon Nov 17, 2008 11:38 pm
Re: Koehler Nitrous Master
Thank you very much! That should make life/tuning a lil more conventional for me, I'm deffinatly no guru, and want as much info as possible to help speed my learning process. I'm pretty sure a steep learning curve will be easier on the wallet!
Who is online
Users browsing this forum: No registered users and 5 guests