BANKING NITROUS

General Nitrous Discussion

Moderator: John_Heard

Post Reply
Message
Author
74ventura
Posts: 13
Joined: Sat Jun 06, 2009 9:06 pm

BANKING NITROUS

#1 Post by 74ventura » Sat Apr 14, 2012 11:33 pm

Are there any wiring diagrams on how this is done?

User avatar
John_Heard
Site Admin
Posts: 5699
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: BANKING NITROUS

#2 Post by John_Heard » Sun Apr 15, 2012 9:54 am

I don't think we have any on this site, you're just going to wire it up like two separate kits left bank / right bank, or front 4 / back 4 depending on how you have it plumbed. There would just be a timer for both stages, or a progressive setup that way.

74ventura
Posts: 13
Joined: Sat Jun 06, 2009 9:06 pm

Re: BANKING NITROUS

#3 Post by 74ventura » Sun Apr 15, 2012 10:23 am

Thanks Mr. Heard,but i have tried wiring this digiset up 3 or 4 different ways and it will not turn the pass. side bank on.I am using the power grid 7730 is there a way to use it to activate the other bank?I'm using a single fogger.

User avatar
John_Heard
Site Admin
Posts: 5699
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: BANKING NITROUS

#4 Post by John_Heard » Sun Apr 15, 2012 10:28 am

There are many ways to do all that. You'll have to describe what you're wanting to do here. Are you turning the first bank on at the hit (no timer), then using the digiset to bring in the second one? Are you using a progressive?

Is the first bank working like it's supposed to, but only problem can't get the timer to activate the 2nd?

User avatar
John_Heard
Site Admin
Posts: 5699
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: BANKING NITROUS

#5 Post by John_Heard » Sun Apr 15, 2012 10:31 am

Also - are you running a relay on the output of the digiset timer? Is it activating?

74ventura
Posts: 13
Joined: Sat Jun 06, 2009 9:06 pm

Re: BANKING NITROUS

#6 Post by 74ventura » Sun Apr 15, 2012 10:40 am

Yes i am running a relay on the timer.I'm turning the first bank on at the hit (no timer)and i was wanting to turn the second bank on using the timer or the power grid whichever is easier.The first bank is working properly it's just the second one that won't come on at all.

74ventura
Posts: 13
Joined: Sat Jun 06, 2009 9:06 pm

Re: BANKING NITROUS

#7 Post by 74ventura » Sun Apr 15, 2012 10:43 am

I did a search and found a wiring diagram from this site and wired it and it still won't come on.I'm wondering if the timer might be bad.

User avatar
John_Heard
Site Admin
Posts: 5699
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: BANKING NITROUS

#8 Post by John_Heard » Sun Apr 15, 2012 11:07 am

I suppose it's possible, you might bypass the timer and see if everything else works down stream of it (relay, solenoids, etc.).

74ventura
Posts: 13
Joined: Sat Jun 06, 2009 9:06 pm

Re: BANKING NITROUS

#9 Post by 74ventura » Sun Apr 15, 2012 6:39 pm

Mr.Heard i found the problem it was a bad connection the diagram was spot on and everything is working fine. :thumb:

User avatar
John_Heard
Site Admin
Posts: 5699
Joined: Thu May 12, 2005 11:20 am
Location: Resume Speed, Kansas
Contact:

Re: BANKING NITROUS

#10 Post by John_Heard » Sun Apr 15, 2012 9:15 pm

Good deal - great when things start working like they're supposed to!

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest