Nitrous Window Start
Moderator: John_Heard
Nitrous Window Start
Hey I have a question on setting up a nitrous window from a nitrous novice. Should you set the RPM start for your nitrous window switch just above converter stall RPM? Or below to hit as you are hooking up? Or do you need to set it such that the RPM does not fall below the nitrous start RPM during a run? Or is there another factor I missing something here? What’s the best choice?
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
- John_Heard
- Site Admin
- Posts: 5734
- Joined: Thu May 12, 2005 11:20 am
- Location: Resume Speed, Kansas
- Contact:
The window switch is going to be handy for you to set up how the car launches by setting when in the RPM Curve it comes on. I'd suggust setting it about 3500 to start with then experiment with the optimum setting. Bringing it in too early say 2500 might cause a back fire, so I would want it higher than that. On the high side limit you want it to cut the nitrous off before hitting your rev limit setting.
My 1971 X275 Nova | Facebook
Who is online
Users browsing this forum: No registered users and 9 guests